VI-JWB-CW-S

Current - Output (Max):	1.05A
Base Part Number:	VI-JWB
Size / Dimension:	2.28" L x 1.80" W x 0.52" H (57.9mm x 45.7mm x 13.2mm)
Package / Case:	Half Brick
Mounting Type:	Through Hole
Efficiency:	90%
Operating Temperature:	-25°C ~ 100°C
Features:	OCP, SCP
Applications:	ITE (Commercial)
Voltage - Isolation:	3kV
Power (Watts):	100W
Series:	VI-J00™
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	95V
Voltage - Input (Max):	36V
Voltage - Input (Min):	18V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC Converters

DC-DC converters are devices that are used to convert a DC voltage between different voltages. A common application of DC-DC converters is to provide power to an electronic device, such as a laptop or cell phone, by converting a DC voltage between 12 volts and 48 volts. These converters are also used in renewable energy sources, such as solar, wind, and hydro power.The main types of DC-DC converters are the VI-JWB-CW-S type, which stands for Voltage-Inclusive-Junction-Buck-Controlled-Wave-Shaper, and the VI-JWB-CW-W type, which stands for Voltage-Inclusive-Junction-Boost-Controlled-Wave-Shaper.The VI-JWB-CW-S converter has a voltage-inclusive-junction-buck (VIJ) design, which allows it to provide efficient power conversion for a wide range of input and output voltages. The VIJ design is based on the principle of controlling the output voltage by adjusting the ratio of high- and low-side devices in order to maintain an output voltage that lies between the desired input and output voltages.The VI-JWB-CW-W converter also has a VIJ design, but with a voltage-inclusive-boost (VIB) design, which allows for greater power conversion efficiency. The VIB design is based on the principle of controlling the output voltage by increasing the number of high-side devices in order to maintain a voltage that lies between the desired input and output voltages. This allows the converter to be used with higher input voltages and still maintain a desired output voltage.The VI-JWB-CW-S and VI-JWB-CW-W converters have different operating principles. The VI-JWB-CW-S converter works on the principle of buck-control, while the VI-JWB-CW-W converter works on the principle of boost-control. In this way, each type of converter provides different voltage conversion characteristics for the device it is used in.The VI-JWB-CW-S converter also operates on the principle of wave-shaping. This technology is based on the principle that, by shaping the output waveform, the converter can produce an output voltage that is more accurate and efficient than otherwise. This technique is particularly useful when the converter is used in combination with a DC motor or a battery-operated device, as it reduces the amount of heat generated by the converter and increases the efficiency of the transfer of power from input to output.In conclusion, the VI-JWB-CW-S and VI-JWB-CW-W converters are two types of DC-DC converters that are commonly used to convert between DC voltages. These converters are designed using two different voltage control principles: the buck-control and the boost-control. The converters also work on the principle of wave-shaping, which increases the efficiency of the power transfer between input and output.

The specific data is subject to PDF, and the above content is for reference