| Allicdata Part #: | VI-JWP-IY-F3-ND |
| Manufacturer Part#: |
VI-JWP-IY-F3 |
| Price: | $ 0.00 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | Vicor Corporation |
| Short Description: | DC DC CONVERTER 13.8V 50W |
| More Detail: | Isolated Module DC DC Converter 1 Output 13.8V ... |
| DataSheet: |  VI-JWP-IY-F3 Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Current - Output (Max): | 3.62A |
| Base Part Number: | VI-JWP |
| Size / Dimension: | 2.28" L x 1.80" W x 0.79" H (57.9mm x 45.7mm x 20.0mm) |
| Package / Case: | Half Brick |
| Mounting Type: | Through Hole |
| Efficiency: | 90% |
| Operating Temperature: | -40°C ~ 100°C |
| Features: | OCP, SCP |
| Applications: | ITE (Commercial) |
| Voltage - Isolation: | 3kV |
| Power (Watts): | 50W |
| Series: | VI-J00™ |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -- |
| Voltage - Output 1: | 13.8V |
| Voltage - Input (Max): | 36V |
| Voltage - Input (Min): | 18V |
| Number of Outputs: | 1 |
| Type: | Isolated Module |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters provide regulated power from a wide input voltage. They can be used to convert a battery voltageup to 24 V or higher to a level that is compatible with most electroniccircuits. They are also used for low-voltage step-up, such as applying34 V to a laptop powered from a 12 V battery.
The VI-JWP-IY-F3 is designed specifically for DC-DC conversion and is suitable for input voltages up to 55V and output voltages up to 40V. It can be used in a variety of applications including automotive electronics, power electronics, industrial electronics, telecommunication, and power supplies.
The VI-JWP-IY-F3 is a switched mode DC-DC converter with a buck topology. This type of converter works by controlling the switching of an internal transistor to regulate the output voltage. It also utilizes a small inductor to store energy for the switching of the transistor.
The VI-JWP-IY-F3 has a fixed switching frequency of 1MHz, making it capable of operating at higher input voltages and providing more power than a conventional transformer-based converter. It also uses synchronous rectification for improved efficiency and power density. The converter also features an adjustable switching frequency from 200KHz to 1MHz and can be set up for different output voltage and power requirements.
The VI-JWP-IY-F3\'s wide input range makes it suitable for a variety of applications such as automotive, telecommunication, and power-electronics. It is capable of delivering up to 6A output current with a maximum output power of 25W. It features an adjustable soft start to provide smooth transitions during startup as well as thermal protection that prevents the device from overheating or overloading.
The VI-JWP-IY-F3 is a highly efficient DC-DC converter with a low total harmonic distortion. It is also a low-noise and stable device with a low inrush current. Its wide input voltage range, adjustable switching frequency, and high efficiency make it suitable for a variety of applications.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...