VI-JWT-EX

Current - Output (Max):	11.54A
Base Part Number:	VI-JWT
Size / Dimension:	2.28" L x 2.40" W x 0.50" H (57.9mm x 70.0mm x 12.7mm)
Package / Case:	Half Brick
Mounting Type:	Through Hole
Efficiency:	88%
Operating Temperature:	-10°C ~ 100°C
Features:	OCP, SCP
Applications:	ITE (Commercial)
Voltage - Isolation:	3kV
Power (Watts):	75W
Series:	VI-J00™
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	6.5V
Voltage - Input (Max):	36V
Voltage - Input (Min):	18V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC Converters

DC-DC converters are electronic devices that convert a direct current (DC) voltage from one level to another. These are commonly used in many different applications such as cell phones, personal computers, and power systems. DC-DC converters come in many different forms, such as full bridge, half bridge, buck, boost, and forward. DC-DC converters are typically classified based on the topology or circuit design used to provide the conversion. The two primary topologies are the buck and the boost. A buck converter steps down the voltage from an input to an output while the boost converter will increase the voltage from an input to an output. The most common type of DC-DC converter is the VI-JWT-EX application field. It is an advanced switching power supply that can be used for a variety of applications. The VI-JWT-EX is a full bridge converter which is a type of switching power supply that consists of four switches located in a bridge configuration. The device is designed to convert a low-voltage, high current DC source to a higher voltage, lower current DC. It is commonly used for converting low voltage battery or regulated DC voltage sources to regulate high voltages. The VI-JWT-EX application field and working principle are based on the concept of inductor current modulation. This is a process of controlling the flow of current through an inductor by using switching circuits such as transistors or thyristors. Switching elements cause the current in the inductor to ramp up and down, creating a voltage increase or decrease at the output. This technique is highly efficient and yields high power conversion.The VI-JWT-EX application field and working principle include the use of the low-side and the high-side switching elements, which can be either a NPN Bipolar Transistor or a MOSFET. When the high-side switches are closed, current will be injected into the inductor to generate a higher voltage. When the low-side switches are closed, current will be released from the inductor to generate a lower voltage. This technique is used to control the output voltage.The VI-JWT-EX application field and working principle can also be used for protection and isolation purposes. It can be used to protect and isolate the output voltage from changes in the input voltage and to protect the device from external influences such as load surges. It can also be used to maintain the output voltage within a given range by providing a constant output voltage regardless of the input voltage.In conclusion, the VI-JWT-EX application field and working principle are a powerful and reliable tool for DC-DC conversion, isolation, and protection. It is used in many different applications, from on-board electronic supplies to remote telecommunications. With its superior performance, reliability and cost-effective design, the VI-JWT-EX is a popular choice for many different applications.

The specific data is subject to PDF, and the above content is for reference