VM10JB10R0

Series:	VM
Packaging:	Bulk
Part Status:	Active
Resistance:	10 Ohms
Tolerance:	±5%
Power (Watts):	10W
Composition:	Wirewound
Features:	Flame Proof, Moisture Resistant, Safety
Temperature Coefficient:	±300ppm/°C
Operating Temperature:	-55°C ~ 250°C
Package / Case:	Radial
Supplier Device Package:	Radial Lead
Size / Dimension:	0.630" L x 0.472" W (16.00mm x 12.00mm)
Height - Seated (Max):	1.417" (36.00mm)
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole ResistorsThe VM10JB10R0 application field and working principle is a type of component widely used in industrial and automotive electronics. It is an important component that allows a circuit to remain stable without significant electrical changes. A through hole resistor is a resistor that is surrounded by a ceramic body with two metal contacts at both ends. This type of resistor is usually used in high-power applications, including motor control, circuit protection, and more.In a through hole resistor application, the ceramic body is filled with a resistance material and the metal contacts on both ends are connected to the leads of the resistor. This connection allows for the electronic current to flow to and from the resistor, and the intermediate resistance provides a consistent electrical characteristics. This type of resistor is commonly used in both AC and DC circuits, and its working principle is based on the Ohm\'s Law.Generally, a through hole resistor must be installed into a hole on a PCB as the contact points are larger than the other types of resistors. This ensures a better contact with the board and allows a higher level of precision with the current supplied. This also improves the reliability of the circuit, as there is less chance of misdirection of the current.The working principle of a through hole resistor is based on the electrical signal passing through it, which creates a potential difference or voltage. The resistance of the resistor limits the amount of current that flows through it. As a result, the overall current in the circuit remains consistent despite the presence of strong voltage fluctuations. This makes the resistor an important part of stabilizing power supply systems.There are several types of through hole resistors available, each with different performances and characteristics. Some of the most popular types are carbon-film, metal-oxide film, and metal-ceramic. Carbon-film resistors offer the greatest resistance stability and value accuracy. Metal-oxides, on the other hand, have a higher temperature range and are used for high-temperature applications. Metal-ceramic is an especially reliable type of resistor that is often used in high-precision applications.Due to the importance of component stability, through hole resistors are generally rated according to their maximum power and temperature ratings. These ratings refer to the maximum amount of power that a resistor can safely dissipate, as well as the highest temperature that it will withstand before suffering damage. The voltage ratings of a resistor also depend on the application in question, and the wattage rating should match the maximum power dissipation needs.Overall, the VM10JB10R0 application field and working principle is a widely used type of through hole resistor that is used in various electronic applications. It provides stable electrical characteristics, and it is rated according to its power and temperature ratings. This ensures that the circuit will remain stable despite strong voltage fluctuations. Through hole resistors are available in a range of forms and can be used for various applications, including motor control, circuit protection, and more.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description