VS-100MT160PAPBF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes - Bridge Rectifiers

A bridge rectifier is an electrically-assembled set of four or more diodes in such a way that they convert an alternating current (AC) power supply into a full-wave direct current (DC) voltage supply. Bridge rectifiers can be constructed from individual diodes or they can be found in pre-assembled packages. The VS-100MT160PAPBF package is a particular package containing four diodes specifically designed for rectification applications.

The designed use for the VS-100MT160PAPBF is for switching and rectifying applications. It is designed to handle full-wave bridge rectification in AC-DC power supply conversion from a single-phase or multi-phase AC power source. This can be used in applications such as for smoothing and rectifying continuous-wave radio signals, for driving loads such as motors, for charging batteries and other similar applications.

The device consists of four 100-volt PNP bipolar junction transistors and four PNP Darlington transistors. Each of the four transistors are connected in such a way that they form a bridge rectifier circuit. The bridge configuration allows an alternating signal to be rectified into a pulsed DC voltage signal. An incoming signal is applied to the first diode, allowing current to travel through the other diodes in sequence, and thus each diode receives the signal at different times but with the same polarity. The result is an output signal with no inversions or changes in current or voltage direction.

In operation, the VS-100MT160PAPBF bridge rectifier operates in the same manner as any other rectification circuit. The bridge rectifier will accept an AC input voltage and convert it to a DC output voltage. The four diodes in the package act as a switch to allow for the correct current and voltage flow for rectifying the AC signal. The device also has reverse-voltage protection which means, in the event of a voltage spike or surge, the diodes will automatically shut off to protect the other components in the circuit.

Since an alternating signal fed into the VS-100MT160PAPBF package will be converted into an output signal with no inversions or changes in current or voltage direction, this bridge rectifier is perfect for applications where a steady, predictable DC voltage is required. It can also be used in any application where reliable rectification is needed, such as for applications in power supplies, radio, audio, automotive and other industrial uses.

The VS-100MT160PAPBF package is designed for reliable and efficient rectification in switching and rectifying applications over a wide range of temperatures, with a high power dissipation of up to 400 watts. The bridge rectifier also has a high-speed switching response, and its low saturation voltage allows for more efficient rectification. In addition, the device has an environmentally-friendly design, which means it produces less waste heat and has no hazardous air pollutants.

The VS-100MT160PAPBF package is an ideal choice for a wide variety of applications requiring reliable, efficient and cost-effective rectification. Its robust design and superior performance make it the perfect choice for bridging rectification applications.

The specific data is subject to PDF, and the above content is for reference