Allicdata Part #: | VS-113MT140KPBF-ND |
Manufacturer Part#: |
VS-113MT140KPBF |
Price: | $ 71.76 |
Product Category: | Discrete Semiconductor Products |
Manufacturer: | Vishay Semiconductor Diodes Division |
Short Description: | POWER MOD 3PH BRIDGE 110A MTK |
More Detail: | Bridge Rectifier Three Phase Standard 1.4kV Chassi... |
DataSheet: | VS-113MT140KPBF Datasheet/PDF |
Quantity: | 1000 |
15 +: | $ 64.58700 |
Series: | -- |
Packaging: | Tray |
Part Status: | Active |
Diode Type: | Three Phase |
Technology: | Standard |
Voltage - Peak Reverse (Max): | 1.4kV |
Current - Average Rectified (Io): | 110A |
Operating Temperature: | -40°C ~ 150°C (TJ) |
Mounting Type: | Chassis Mount |
Package / Case: | MT-K Module |
Supplier Device Package: | MT-K |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Diodes are electronic components used for controlling the flow of current. They act as current barriers, allowing current to flow in one direction but blocking it from going in the other. Bridge rectifiers are a type of diode array that changes alternating current (AC) to direct current (DC). The VS-113MT140KPBF is a bridge rectifier used in many electrical systems.
The VS-113MT140KPBF is a high power, surface-mountable bridge rectifier. It is used in applications such as power sources and solar systems, as well as in medical and automotive equipment. The VS-113MT140KPBF has a range of current ratings, ranging between 1.4A and 11A, and can able to handle a maximum voltage of 140V. The case and terminals are made of non-conductive plastic to insulate and protect the rectifier.
The working principle of a bridge rectifier is based on diodes. Diodes are electronic components that allow current to move in one direction and do not allow current to flow in the opposite direction. When the AC current is applied to the diode, the diode conducts the current in only one direction, depending on the voltage polarity. By connecting four diodes in a bridge configuration, the current will be allowed to flow in one direction only, and the alternating AC current will be converted to a direct current.
The VS-113MT140KPBF comprises four diodes connected in such a way that each diode serves two distinctive purposes: two diodes connected in series serve as a direct current output, while the two other diodes connected in parallel serve as a reverse current protection. The resistivity of the diodes and their configuration influences the output current, as some of the current will be dropped due to the applied voltage.
When using the VS-113MT140KPBF, it is essential that the voltage for the power source should be properly adjusted. If the voltage is too low, the current will be too low and damage to the equipment might occur. On the other hand, if the voltage is too high, it may lead to thermal runaway, which might cause the device to overheat and damage components. Therefore, it is very important to maintain proper voltage.
In summary, the VS-113MT140KPBF is a high power, surface-mountable bridge rectifier used in many electrical applications. It is designed to convert alternating current to direct current and is suitable for a range of power sources and solar systems, as well as medical and automotive components. It is made up of four diodes that serve two distinct purposes and require careful voltage adjustments to ensure the proper operation of the rectifier.
The specific data is subject to PDF, and the above content is for reference
BRIDGE RECT 1PHASE 1KV 2A KBPMBridge Rec...
IC BRIDGE RECT 1.5A 100V WOMBridge Recti...
IC BRIDGE RECT 1.5A 50V WOMBridge Rectif...
RECT BRIDGE 1200V 90A MTKBridge Rectifie...
RECT BRIDGE 1A 240VBridge Rectifier Sing...
BRIDGE RECT 3 PHASE 800V 58ABridge Recti...