VS-160MT160C

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A bridge rectifier, as the name suggests, is a device consisting of four diodes connected in a bridge circuit configuration. It is a form of full-wave rectification which makes use of both the positive and negative portions of the AC sine wave to produce pulsed DC power from an AC source. The VS-160MT160C bridge rectifier is a compact, two-phase, AC-input rectifier which can convert DC voltages from zero through its specified output voltage level. It is typically used in applications such as switching power supplies, switching regulators, battery chargers, and industrial equipment for DC voltage conversion.

The VS-160MT160C bridge rectifier is designed to operate over a wide range of input voltages and currents, allowing for efficient conversion of AC power input into DC power output. Its output voltage is adjustable via a control input and is normally set to the desired DC output voltage. When the AC input voltage is higher than the set DC output voltage, the rectifier will convert the excess voltage into current in proportion to the pressure difference. Conversely, when the AC input voltage is lower than the set DC output voltage, the rectifier will convert the lower voltage into current in proportion to the pressure difference. This process of voltage conversion makes the VS-160MT160C bridge rectifier an efficient solution in applications requiring accurate DC conversion.

In terms of operation, the VS-160MT160C bridge rectifier operates by utilizing the “bridge” configuration of the four diodes. The four diodes are connected in series in order to rectify alternating current (AC) into direct current (DC). The positive half-cycles of the AC voltage are allowed to pass through to the output while the negative half-cycles are blocked, leaving only the positive DC voltage at the output. It should be noted that the bridge rectifier can function in both continuous and pulsed AC voltage applications. This bridge circuit configuration therefore eliminates the need for a separate half-wave rectifier, since the same result can be achieved with fewer components.

In combination with the four built-in diodes, the VS-160MT160C bridge rectifier also includes two capacitors to provide additional filtering of the output voltage and to reduce noise. Having the capacitors connected in-line with the bridge rectifier ensures that the output voltage remains constant despite fluctuating input voltage levels. In addition to the capacitors, the VS-160MT160C bridge rectifier also includes two thermistors which protect against over-voltage and over-current situations and prevent damage to the circuit.

The VS-160MT160C bridge rectifier is a great solution for applications requiring accurate DC voltage output. Its built-in capacitors, thermistors, and bridge circuit configuration enable efficient and reliable conversion of AC input voltage into DC output voltage. Its ability to operate over a wide range of input voltages and currents makes it a versatile solution for power converters, battery chargers, and industrial equipment. As a result, the VS-160MT160C bridge rectifier shows great promise as a reliable solution for a variety of applications involving DC voltage conversion.

The specific data is subject to PDF, and the above content is for reference