Allicdata Part #: | 2KBP10-ND |
Manufacturer Part#: |
VS-2KBP10 |
Price: | $ 1.03 |
Product Category: | Discrete Semiconductor Products |
Manufacturer: | Vishay Semiconductor Diodes Division |
Short Description: | RECTIFIER BRIDGE 1000V 2.0A D-44 |
More Detail: | Bridge Rectifier Single Phase Standard 1kV Through... |
DataSheet: | VS-2KBP10 Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 0.92610 |
10 +: | $ 0.82908 |
25 +: | $ 0.78725 |
100 +: | $ 0.64663 |
250 +: | $ 0.60445 |
500 +: | $ 0.53416 |
1000 +: | $ 0.42171 |
2500 +: | $ 0.39359 |
5000 +: | $ 0.37485 |
Series: | -- |
Packaging: | Bulk |
Part Status: | Active |
Diode Type: | Single Phase |
Technology: | Standard |
Voltage - Peak Reverse (Max): | 1kV |
Current - Average Rectified (Io): | 2A |
Voltage - Forward (Vf) (Max) @ If: | 1V @ 1A |
Operating Temperature: | -40°C ~ 150°C (TJ) |
Mounting Type: | Through Hole |
Package / Case: | 4-SIP, D-44 |
Supplier Device Package: | D-44 |
Base Part Number: | 2KBP* |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Bridge rectifiers (or bridge rectifiers) are common power semiconductor devices used in almost all AC/DC electrical applications. They are constructed as a four-terminal device, consisting of four diodes, connected in a bridge configuration. The diodes can be either individual diodes, two in series, two in parallel and two in series, connected in mesh, or two in parallel and two in series, connected in voltages.
The purpose of a bridge rectifier is to convert AC voltage into DC voltage. By operating in a bridge configuration, the bridge rectifier allows both positive and negative pulse components to be present at the same time. This creates a square wave, which is then converted into a DC voltage.
A VS-2KBP10 bridge rectifier is a type of diode bridge rectifier which is specifically designed for use in AC/DC power supplies. It has a high DC power rating and a low voltage rating, making it suitable for use in a range of power supplies.
The VS-2KBP10 is often used in applications such as rectification of AC power sources and in the testing or protection of DC systems. In such applications the device is usually connected in parallel to the rectifying AC circuit to create an effective rectifying bridge.
The working principle of the VS-2KBP10 is similar to that of other bridge rectifiers. As the alternating voltage is applied to the bridge rectifier, the diodes direct the current to the output terminals and the capacitor acts as a filter to smooth the ripple in the output. The device also assists in reducing the circulating current ripple in the power supply, thereby reducing power losses.
The VS-2KBP10 has a variety of advantages, such as its ability to reduce heat losses, its high efficiency and its tolerance to voltage and current surge. In addition, its small size and weight make it easier to install and use.
The VS-2KBP10 bridge rectifier is designed for applications where a long service life and performances is required. Its high efficiency, high reliability and low cost make it ideal for a large range of commercial and domestic applications including power supplies and lighting.
The specific data is subject to PDF, and the above content is for reference
BRIDGE RECT 1PHASE 1KV 2A KBPMBridge Rec...
IC BRIDGE RECT 1.5A 100V WOMBridge Recti...
IC BRIDGE RECT 1.5A 50V WOMBridge Rectif...
RECT BRIDGE 1200V 90A MTKBridge Rectifie...
RECT BRIDGE 1A 240VBridge Rectifier Sing...
BRIDGE RECT 3 PHASE 800V 58ABridge Recti...