VS-36MB160A

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes - Bridge Rectifiers are a versatile component of the power electronics industry because they are used to construct efficient rectifiers that are capable of handling large load currents and providing high-power functionality. The VS-36MB160A is a bridge rectifier that is ideal for applications such as electric motors, DC power supplies, inverters and phase controls. It is a four-terminal device that acts as an electrical bridge between AC and DC power.The working principle of a bridge rectifier is based on the use of diodes. The purpose of the diodes is to direct the current flow from the AC source to the DC load. The voltage that is applied to the input terminals of the VS-36MB160A is applied to the two outer terminals, the anode (+) and cathode (-). A single diode is then connected to the anode and the cathode to form a bridge. This bridge rectifier has two diodes connected in series to the anode and one diode connected in series to the cathode. When AC voltage is applied to the input terminals, the diodes form a complete electrical circuit which allows the current to flow from the anode to the cathode. The current flows through the diodes in the order shown on the schematic which is determined by the polarity of the AC voltage.The VS-36MB160A has the following key specifications: Maximum reverse voltage of up to 800 volts, a maximum operating temperature of 150 degrees Celsius, low forward voltage drop of 0.5 volts, and a high current application of 11.9 Amps. This bridge rectifier has a low forward voltage drop which helps to reduce power consumption in the application and enables efficient operation. The device is also capable of handling high peak inrush currents, allowing it to be used in circuits where short-term high current surges occur. The low forward voltage drop also helps to reduce heat buildup in the circuit and helps to ensure the device remains reliable.The VS-36MB160A is primarily used in heavy-duty industrial applications and is most commonly used in DC motor drives, AC to DC converters, power supplies and active power factor correction circuits. It is also used as an alternative to more traditional, low-power rectifying solutions, such as Schottky diodes and CLRCs. Due to its high current and voltage rating, the VS-36MB160A can be used in applications where higher levels of power are required, such as aircraft and automotive applications.In summary, the VS-36MB160A bridge rectifier is a unique and versatile component that can be used in a wide range of heavy-duty industrial applications. It has a low forward voltage drop, a high current rating, and is capable of handling high peak inrush currents. By utilising the four-terminal configuration of the VS-36MB160A, efficient power conversion and regulation can be performed in applications where higher levels of power are required.

The specific data is subject to PDF, and the above content is for reference