Allicdata Part #: | T50RIA120-ND |
Manufacturer Part#: |
VS-T50RIA120 |
Price: | $ 23.02 |
Product Category: | Discrete Semiconductor Products |
Manufacturer: | Vishay Semiconductor Diodes Division |
Short Description: | SCR PHASE CONT 1200V 50A D-55 |
More Detail: | SCR Module 1.2kV 80A Single Chassis Mount D-55 T-M... |
DataSheet: | VS-T50RIA120 Datasheet/PDF |
Quantity: | 1000 |
Moisture Sensitivity Level (MSL): | 1 (Unlimited) |
Lead Free Status / RoHS Status: | Lead free / RoHS Compliant |
10 +: | $ 20.93050 |
Current - On State (It (RMS)) (Max): | 80A |
Base Part Number: | T*RIA |
Package / Case: | D-55 T-Module |
Mounting Type: | Chassis Mount |
Operating Temperature: | -40°C ~ 125°C (TJ) |
Current - Hold (Ih) (Max): | 200mA |
Current - Non Rep. Surge 50, 60Hz (Itsm): | 1310A, 1370A |
Current - Gate Trigger (Igt) (Max): | 100mA |
Voltage - Gate Trigger (Vgt) (Max): | 2.5V |
Series: | -- |
Current - On State (It (AV)) (Max): | 50A |
Voltage - Off State: | 1.2kV |
Number of SCRs, Diodes: | 1 SCR |
Structure: | Single |
Moisture Sensitivity Level (MSL): | -- |
Part Status: | Active |
Lead Free Status / RoHS Status: | -- |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The VS-T50RIA120 is a four-terminal module that works as a solid state relay using a thyristor, otherwise known as a SCR, to control the flow of power from an AC voltage source directly to a load.
The thyristor module operates with a Voltage Sensing Thyristor (VST) and a 50 Ampere Rectifier, which together make up the VS-T50RIA120. A VST is a device that utilizes a usually small voltage to actuate a larger one. The VS-T50RIA120 operates differently from electromechanical relays, because it does not have any moving parts, and works just by varying current flow when voltage is applied.
The main application field for the VS-T50RIA120 is AC voltage control. It has the advantage of switching off at any point during the AC cycle and provides highly precise voltage control. It is widely used as a lighting relay and as a motor control relay in factories and industrial applications.
The working principle of the VS-T50RIA120 consists of two main stages: the Voltage Sensing Thyristor and the 50 Ampere Rectifier. The VST is connected with a remote input, which is usually supplied by a small voltage, often 5 or 24 VAC. The input generates a signal to command the VS-T50RIA120 to perform its switching operation, which then controls the flow of AC current from the source directly to the load. The 50 Ampere Rectifier is basically a diode bridge rectifier, which allows the current to flow in one direction only, while blocking it from the opposite direction. This rectifier functions as a switch to control the AC power at the load side.
The operation of the VS-T50RIA120 is based on a thyristor, also known as a silicon-controlled rectifier (SCR). This is a semiconductor switching device, meaning it uses electricity to control the flow of electricity. It functions similar to a transistor, but faster and able to handle higher voltages. The thyristor senses the AC voltage, and when activated by the signal from the input, it switches on to allow the current to pass through. When the signal ceases, the thyristor switches off and the current stops flowing.
In conclusion, the VS-T50RIA120 is a great solution for controlling the flow of AC current from a source directly to a load. The module works by using a VST to generate a signal that actuates the thyristor, which is then controlled by a diode bridge rectifier. This combination of components allows for precise voltage control and is often used in industrial and lighting applications.
The specific data is subject to PDF, and the above content is for reference
SCR MODULE 4200V 2820A DO200AESCR Module...
SCR MODULE 3800V 700A MODULESCR Module 3...
SCR PHASE CTRL MOD 2000V 1000ASCR Module...
MODULE DIODE 230A MAGN-A-PAKSCR Module 1...
MOD THYRISTOR/DIODE 2000V Y1-CUSCR Modul...
SCR MODULE 1900V 300A NONSTANDSCR Module...