VS-VSKL142/14PBF Discrete Semiconductor Products

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors, also known as silicon controlled rectifiers (SCRs), are three-terminal semiconductor devices used mainly in power control applications. Modules integrated with thyristors are employed to provide improved reliability and performance in both AC and DC signal applications. The VS-VSKL142/14PBF in particular is a standard general purpose thyristor with a passive snubber integrated in the module. This module is used mainly to control the output of power from an AC power source.

The VS-VSKL142/14PBF module consists of four thyristors connected in series on a single terminal. Each thyristor has three terminals: a gate, an anode and a cathode. The gate can be used to trigger the thyristor and regulates the current flow. The anode and cathode are the two terminals through which the current flows when the thyristor is in the “on” state. The thyristors are integrated into the module with a passive Snubber circuit. This Snubber circuit helps to reduce the transients that can affect the thyristors when they are switched on.

The main application area of the VS-VSKL142/14PBF module is in AC signal applications and power control. It is mostly used in AC circuits, such as motors, solenoids, and other AC loads. The module has been designed to withstand a maximum voltage of 600 volts and a maximum current of 6 amperes. The module is usually connected to the AC line in order to control the power output. It can be used to start and stop a motor, or to regulate its speed.

The working principle behind the VS-VSKL142/14PBF module is relatively simple. When a small voltage is applied to the gate of the first thyristor, it turns on, allowing current to flow through the module. This then allows current to flow through the snubber circuit, which acts as a resistor to control the current flow in the circuit. When the current reaches a certain threshold, the other three thyristors in the module are triggered and the current flow is controlled. The Snubber circuit then allows for the current to be regulated at a safe level.

In conclusion, the VS-VSKL142/14PBF module is a standard general purpose thyristor with a passive snubber integrated in the module. This module is used mainly in AC signal applications and power control, and is designed to withstand a maximum voltage of 600 volts and a maximum current of 6 amperes. The working principle consists of applying a small voltage to the gate of the first thyristor to turn it on, and then allowing current to flow through the snubber circuit. The module can then be used to start and stop a motor, or to regulate its speed.

The specific data is subject to PDF, and the above content is for reference