VS-VSKT230-14PBF

Current - On State (It (AV)) (Max):	230A
Package / Case:	MAGN-A-PAK
Mounting Type:	Chassis Mount
Operating Temperature:	-40°C ~ 130°C (TJ)
Current - Hold (Ih) (Max):	500mA
Current - Non Rep. Surge 50, 60Hz (Itsm):	7500A, 7850A
Current - Gate Trigger (Igt) (Max):	200mA
Voltage - Gate Trigger (Vgt) (Max):	3V
Current - On State (It (RMS)) (Max):	510A
Series:	--
Voltage - Off State:	1.4kV
Number of SCRs, Diodes:	2 SCRs
Structure:	Series Connection - All SCRs
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors - SCRs - Modules are electronic components that are able to control the rate of electrical current in various applications. One of the most commonly used devices in this category is the VS-VSKT230-14PBF. This module is a 3-phase thyristor which is designed to protect industrial equipment and systems from too much voltage or current by automatically adjusting the rate of current flowing through it.The VS-VSKT230-14PBF module consists of 3-phase thyristors which are mounted on an insulating material. These thyristors can be triggered either externally or using other components such as resistors and capacitors. The module is designed to provide a current limit of up to 16A and a voltage limit of up to 2400VAC.The module is primarily used in applications where it is necessary to precisely control the rate of electrical current. For instance, it can be used as a crowbar in power supplies to protect against excessive current and also as a starter for industrial machines. It can also be used as a breaker in an electrical panel to cut off current in case of a surge or overload.The VS-VSKT230-14PBF module operates by using two sets of thyristors which are connected in parallel. When the control signal is applied, the first set of thyristors will turn on, causing the current to increase significantly. At the same time, the second set of thyristors will turn on with a delay and create a negative feedback, causing the current to decrease again. By controlling the delay between the two sets of thyristors, the rate of current can be precisely controlled.The VS-VSKT230-14PBF module is also used to protect motors and other power-limited systems from too much current. By using a voltage-limiting circuit, it can be used to reduce the voltage to the motor in case of a power surge. Additionally, the module can also protect motors from being overloaded or stalled by providing sufficient current to start the motor and then reducing the current when the motor reaches its rated speed.In conclusion, the VS-VSKT230-14PBF module is a useful device for precisely controlling the rate of current. It can be used in a wide range of applications, such as power supplies, electrical panels and motors, to protect against excessive current and protect against power disturbances. Additionally, it can also be used to control the speed of motors by providing the right amount of current at the right times.

The specific data is subject to PDF, and the above content is for reference