W22-3R3JI Resistors |
|
| Allicdata Part #: | 985-1133-2-ND |
| Manufacturer Part#: |
W22-3R3JI |
| Price: | $ 0.00 |
| Product Category: | Resistors |
| Manufacturer: | TT Electronics/Welwyn |
| Short Description: | RES 3.3 OHM 7W 5% AXIAL |
| More Detail: | 3.3 Ohms ±5% 7W Through Hole Resistor Axial Flame ... |
| DataSheet: |  W22-3R3JI Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Series: | W20 |
| Packaging: | Tape & Reel (TR) |
| Part Status: | Discontinued at Digi-Key |
| Resistance: | 3.3 Ohms |
| Tolerance: | ±5% |
| Power (Watts): | 7W |
| Composition: | Wirewound |
| Features: | Flame Proof, Safety |
| Temperature Coefficient: | ±75ppm/°C |
| Operating Temperature: | -55°C ~ 200°C |
| Package / Case: | Axial |
| Supplier Device Package: | Axial |
| Size / Dimension: | 0.315" Dia x 0.866" L (8.00mm x 22.00mm) |
| Height - Seated (Max): | -- |
| Number of Terminations: | 2 |
| Failure Rate: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Through Hole Resistors are a type of resistor component used in electrical and electronic circuits. The W22-3R3JI is an industrial, precision through-hole resistor with a wide range of applications.
Application Field
The W22-3R33JI has been designed to meet the requirements for stability and precision, in both commercial and industrial environments. It is a through-hole resistor with a resistance range between 10 and 10,000 ohms. The W22-3R3JI is rated for operation up to 150 Volts and 5 Watts. It has an operating temperature range of -55°C to +125°C, and is also RoHS and REACH compliant. It is often used as an adjustable resistor, in the form of a potentiometer, where precise resistive value control is required.
It can also be used in consumer electronics such as audio equipment, automotive electronics, amplifiers, power supplies, and other related equipment.
Working Principle
The W22-3R3JI works in much the same way as any other type of resistor, and so all the principles that apply to conventional resistors also apply to this type of component. Fundamentally, resistors are designed to limit the flow of electrical current. The amount of current that the resistor can allow is determined by its resistance values, which can either be provided by the manufacturer or determined through calibration.
The W22-3R3JI works on the principle of reduced current flow. The resistor acts as a ‘block’ or an ‘impediment’ to the flow of electricity, because the component produces a back-pressure and absorbs energy in the form of heat. As the electricity ‘sees’ the blocked path, it is forced to ‘go around’ it, thereby reducing the amount of current that can flow through it. This reduction in current flow is the basis of the resistor’s working principle.
Conclusion
The W22-3R3JI is a precision through-hole resistor that can be used for a wide range of applications, including the control of current in audio and automotive electronics, amplifiers, power supplies, and other related equipment. It has a wide operating temperature range and is also RoHS and REACH compliant. The resistor acts as a ‘block’ or an ‘impediment’ to the flow of electricity, causing a reduction in current flow.
The specific data is subject to PDF, and the above content is for reference
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...