W3A43A150KAT2A

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Capacitor networks, or capacitive arrays, are electronic devices and circuits consisting of capacitors interconnected in a specific manner. The W3A43A150KAT2A is a capacitor array specifically designed for AC-coupled applications. It is typically used in a wide range of industrial and consumer electronics, including audio and lighting systems, power supplies, and voltage regulators.

The W3A43A150KAT2A capacitor array is a four-terminal device – two signals, one AC coupled and one DC coupled, plus two ground terminals. This particular type of array includes two 1-kV internal resistors on each of the two signal lines, and it is rated for up to 1.5 kV, allowing for relatively high voltage applications.

The main feature of the W3A43A150KAT2A capacitor array is that it has a frequency dependent transfer function. This means that, when connected to an AC input, the capacitive array will behave in a certain way depending on the frequency of the input. For example, a higher frequency signal will have a greater capacitive efficiency than a lower one. This feature is useful for applications such as filtering out high-frequency interference from a signal.

The working principle of the W3A43A150KAT2A capacitor array is based on a phenomenon known as “capacitive coupling”. This phenomenon occurs when two capacitors are connected together and the voltage across them is changed. When the voltage is changed, the amount of capacitance between the two capacitors also changes. This is referred to as the “coupling coefficient”. The coupling coefficient is determined by the magnitude and type of the two capacitors and the type of voltage employed.

Capacitive coupling is used in many applications and can be used to do a variety of tasks. In the W3A43A150KAT2A, the capacitive coupling is employed to AC-couple a signal through the array. This is useful for applications where the signal needs to be filtered but not affected by any DC biases or voltage irregularities. The W3A43A150KAT2A also includes two additional ground pins which can be used to reduce noise and improve overall signal integrity.

The W3A43A150KAT2A is a reliable and easy-to-use capacitor array. It can be used in a variety of applications and is especially adept at AC-coupling high-frequency signals. Additionally, its two internal resistors added protection from overvoltage and power surges. As such, the W3A43A150KAT2A is an ideal choice for a wide variety of industrial and consumer electronics.

The specific data is subject to PDF, and the above content is for reference