W3A43C333KAT2A

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The W3A43C333KAT2A is a capacitor network that is used in a variety of applications. It is a three row, three column, four pole device and is rated at a capacitance of 18 nF. The device has an impedance of approximately 4kΩ and a wide frequency range of up to 1GHz. It is designed for applications where a low insertion loss is required and high frequency stability is required. The capacitor network is used in applications such as RF Automatic Gain Control (AGC) circuits, phase-shifters, and harmonic limiters.

The W3A43C333KAT2A is a matrix of four capacitors with the following value: C1=680pF, C2=2.2nF, C3=17nF, and C4=2.2nF. Each capacitor is connected in series with two other capacitors and each pair is connected in series with two other pairs. This arrangement creates a matrix which has four poles and three columns.

The working principle of the W3A43C333KAT2A is based on the principle of inductive-capacitive coupling. An AC signal applied to the inputs of the capacitor network will induce an electric current in the capacitors, which in turn creates an electromagnetic field. This field creates an impedance that is dependent on the frequency of the applied AC signal. By adjusting the values of the capacitors, the frequency of the arising impedance can be tuned. This can be used to create a range of different impedances and thus different frequencies.

The W3A43C333KAT2A is a high performance capacitor network that is used in many applications. It is capable of providing low insertion loss, high frequency stability, and a wide range of impedances. As such, it is used in many different applications such as RF AGC circuits, phase-shifters, and harmonic limiters.

The specific data is subject to PDF, and the above content is for reference