Allicdata Part #: | 1857-1008-ND |
Manufacturer Part#: |
WB-USB-24LP-A |
Price: | $ 58.21 |
Product Category: | RF/IF and RFID |
Manufacturer: | Datawave LLC |
Short Description: | 2.4 GHZ 6.3MW WIRELESS BRIDGE WI |
More Detail: | RF Transceiver 2.4GHz 802.15.4 USB 115.2kbps |
DataSheet: | WB-USB-24LP-A Datasheet/PDF |
Quantity: | 10 |
1 +: | $ 52.92000 |
Series: | -- |
Part Status: | Active |
Function: | Transceiver |
Modulation or Protocol: | 802.15.4 |
Frequency: | 2.4GHz |
Applications: | General Purpose |
Interface: | USB |
Sensitivity: | -101dBm |
Data Rate (Max): | 115.2kbps |
Features: | -- |
Voltage - Supply: | 7 V ~ 30 V |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The WB-USB-24LP-A RF receiver, transmitter, and transceiver finished unit combines the easily configurable RF performance, with the high performance and convenience of USB programmability. The device features low noise, high gain, linearity, wide dynamic range, and specifically designed filters to make it ideal for automotive, communication, and broadcast applications. It can be used in various applications such as portable devices, base station receivers, antenna front-end modules, and broadcast basebands. Because of its advanced features, this device is suitable for both single-chip implementation and low-cost microprocessor-based implementations.
The WB-USB-24LP-A works by amplifying signals from the antenna to enable conversation, data exchange, and broadcasts. It includes an RF front-end circuit with a low noise amplifier, a bias circuit, and an amplifier. The device also includes a controllable, selectable, and optimized band pass filter. The filter provides frequency stability, and helps the amplifier achieve high linearity to reduce inter-modulation distortion, and provide better performance. The device also includes a low phase noise local oscillator, which helps improve the signal received from the antenna. The device can be configured with multiple RF connections, such as SMA, MMCX, and BNC connectors.
To make it easier to use, the WB-USB-24LP-A is USB programmable. It also comes with a number of features that can be configured or programmed, such as noise figure, gain, frequency, and filter selection. The device includes a programmable gain control that allows the user to configure the gain to maximize receiver sensitivity, as well as reduce interference and distortion. Additionally, a power detector circuit enables users to monitor the power used by the device, and adjust it accordingly.
The WB-USB-24LP-A is ideal for wireless audio transmission applications, such as short range FM broadcast, broadcasting over a local area network, or over the internet. It can also be used for voice communication, such as mobile phones, repeaters, and base stations. The device is also suitable for wireless data transmission applications, such as Bluetooth, Wi-Fi, ZigBee, and Z-Wave.
The WB-USB-24LP-A is a reliable device that offers a wide range of features and excellent performance. It can be used in a variety of applications, from consumer electronics to automotive, communication, and broadcast applications. It is easy to program and configure, thanks to its USB programmability, and its ability to be easily connected to multiple RF connections. Thanks to its advanced features and performance, the WB-USB-24LP-A is an ideal choice for people looking for an RF transceiver finished unit.
The specific data is subject to PDF, and the above content is for reference
EV-DO USB CELLULAR MODEM AERISRF Transce...
9XSTREAM 100MW RS232/485 9600BPSRF Trans...
MODEM CDMA US BUNDLE IPRF Transceiver, C...
MODEM RF 900MHZ RS232/485 W/ACCRF Transc...
EASYRADIO 433MHZ USB TRANSMITTERRF Trans...
RF TRANSCEIVER 2.4GHZ KEYFOBRF Transmitt...