WL4S-3F1330V

Series:	W4S-3 Inox
Part Status:	Active
Sensing Method:	Retroreflective
Sensing Distance:	157.480" (4m)
Voltage - Supply:	10 V ~ 30 V
Response Time:	500µs
Output Configuration:	PNP
Connection Method:	Cable
Ingress Protection:	IP66, IP67, IP68, IP69K
Cable Length:	78.740" (2000.00mm)
Light Source:	Red (650nm)
Adjustment Type:	--
Operating Temperature:	-30°C ~ 70°C (TA)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optical Sensors - Photoelectric, Industrial

Optical Sensors are widely used in industrial applications due to their inherent robustness and low cost. Among them, Photoelectric Sensors and Industrial Optical Sensors are two major subsets. In this article we will discuss the application field and working principle of WL4S-3F1330V, a Photoelectric Sensor manufactured by Sena Technologies.WL4S-3F1330V is a Photoelectric Sensor featuring a very robust and reliable housing. It is designed to be used in harsh industrial environment such as low and high heat, dust, water, and vibration. It is also very easy to install and offers a broad range of mounting options.The working principle of the WL4S-3F1330V is relatively simple. It features two light beams – an sensing beam and a receiving beam – between which a reflective object must pass in order to activate the sensor. The sensing beam is directed toward the reflective surface, while the receiving beam is directed at an angle. When the reflective object passes between the two beams, it causes the receiving beam to be blocked, triggering the sensor.The WL4S-3F1330V is suitable for a variety of industrial applications, such as position sensing, level detection, automation control, and machine safety. It is also a great choice for outdoor applications, as it is highly resistant to dust, water, and other environmental influences.When installing the WL4S-3F1330V, there are a few important factors to consider. First, the distance between the two beams should be as short as possible, as this will increase the sensitivity of the sensor. Secondly, the alignment of the receiving beam should be adjusted to the incoming reflective object. This will ensure that it is effectively blocked by the object and triggers the sensor.The WL4S-3F1330V is a very reliable and efficient optoelectronic sensor and is suitable for a wide range of industrial uses. Its robust design and mounting options make it a great choice for harsh industrial environments, while its easy installation and alignment make it simple to set up in virtually any application.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description