WL4S-3P2430V

Series:	W4S-3 Inox
Part Status:	Active
Sensing Method:	Retroreflective
Sensing Distance:	157.480" (4m)
Voltage - Supply:	10 V ~ 30 V
Response Time:	500µs
Output Configuration:	PNP
Connection Method:	Connector, M12
Ingress Protection:	IP66, IP67, IP68, IP69K
Cable Length:	--
Light Source:	Red (650nm)
Adjustment Type:	--
Operating Temperature:	-30°C ~ 70°C (TA)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to WL4S-3P2430V

The WL4S-3P2430V is an opto-electronic detection module that combines a dichroic reflector and a photocell. It is a type of photoelectric sensor, which converts a beam of light into a detectable electric signal, enabling non-contact measurements. This particular model has a detection distance of up to 24.3mm and an excellent divergence angle. This makes it ideal for use in industrial applications.

Applications of WL4S-3P2430V

The WL4S-3P2430V is ideal for applications that require accurate measurements of objects or materials without requiring physical contact. Some of the many applications are:

• Distance, thickness, and speed measurement
• Fiber length measuring
• Material presence detection
• Material weight and size measurement
• Paper, liquid, and solid level measurement
• Presence, absence, and presence/absence checking
• Position and level detection
• Position and end point detection
• Positioning, sorting, and part discrimination
• Signal counting and logic checking
• Surface and defect detection
• Vibration, strain, and displacement measurement

Working Principle of WL4S-3P2430V

The WL4S-3P2430V works by detecting the change in light intensity. The sensor consists of a reflecting mirror and a photocell. The light source is placed on the reflecting mirror, and the light that it reflects is detected by the photocell. When the light intensity changes, due to an object passing in between the light source and the photocell, the photocell produces a signal that is sent to an analogue circuit. The analogue circuit then processes the signal and produces an output.

Conclusion

The WL4S-3P2430V is an opto-electronic detection module that combines a dichroic reflector and a photocell. It is ideal for use in applications such as distance, thickness, and speed measurement, material presence detection, and surface and defect detection. The working principle of the sensor is based on the change in light intensity detected by the photocell, which produces an output signal that is processed by an analogue circuit.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description