WMS7111010P

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Digital Potentiometers, or DPs for short, are devices commonly used for digital data acquisition. DPs measure electrical resistivity, and are used in a variety of applications in a wide range of industries. The WMS7111010P digital potentiometer, produced by Wisdom Microelectronics Group, is a good example of the type of digital potentiometer devices used for data acquisition.

The WMS7111010P is a 10-bit digi-pot, meaning that it has 10-bits of resolution. This resolution allows it to measure more subtle differences in electrical resistivity. It also has a maximum rated step size of 128 steps, making it suitable for applications where extremely precise measurement is required. In terms of range, the WMS7111010P has a total potentiometer track of 10K ohms, giving it a wide range of measurement capabilities.

The WMS7111010P makes use of two pins to receive input signals: pins 1 and 2. The data is received by an internal Analog-to-Digital converter and stored in an internal register. The potentiometer can then be set by the user by writing the desired digital value to the internal register. This data is then converted back to an analog signal by an internal Digital-to-Analog converter, and output via the pin 3 of the device.

One of the great advantages of using digital potentiometers is that they can be configured and programmed using external microcontrollers. This makes them attractive for use in embedded systems, where complex signal processing is required. For example, the WMS7111010P has an SPI bus interface, which allows it to be easily programmed and controlled by an external microcontroller.

In addition to providing precise measurement of electrical resistivity, digital potentiometers can also be used to adjust the gain of signals. The WMS7111010P is capable of setting the gain of a signal in up to 255 steps, making it a great choice for RF applications. This makes it an attractive choice for applications where precise control of signal gain is required.

The WMS7111010P digital potentiometer is an ideal choice for a wide range of digital data acquisition applications. Its 10-bit resolution and maximum rated step size of 128 steps make it suitable for precise measurements, while its ability to be programmed and controlled by external microcontrollers makes it an attractive choice for use in embedded systems. Its ability to adjust signal gain in up to 255 steps makes it a good choice for RF applications. For these reasons, the WMS7111010P digital potentiometer is an excellent choice for a wide range of digital data acquisition applications.

The specific data is subject to PDF, and the above content is for reference