WP7113SRD/D

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

LED Indication is one of the most commonly used types of discrete components in modern electronics. The WP7113SRD/D is a commonly used LED indicator, which is commonly used for user interface applications, for example, displaying power and network status on routers, modem cards, and other similar devices. It is also used in industrial and automotive applications, as well as in medical devices.

The WP7113SRD/D LED is a dual color component, with two separate LED emitters of different colors, typically red and green, housed in a single case. This design allows for alternate flashes of each LED at different intervals, which can be used to indicate different system states or error conditions. Red and green are the most common colors used, although other color combinations exist.

The WP7113SRD/D LED is a glass epoxy design, which means that both the anode and the cathode must be connected to a power source, or there can be no light output. The LED itself consumes very little power, and is not suitable for direct current applications. Instead, it works best when driven by a special purpose low voltage drive IC.

The LED itself has no internal circuitry, and must be wired to a high side driver, such as the WS7567. This driver IC is designed to switch the voltage from high to low, based on the input from the GPIO pin (General Purpose Input/Output), enabling the LED to light up. The GPIO pin can be connected to a switch, a timer, or any other digital signal.

The WS7567 driver IC is a common choice for use with the WP7113SRD/D LED, as it allows for the greatest amount of flexibility in its operation. With the WS7566, the user can set the amount of current to flow into the anode, as well as the duration of time the LED will remain lit. This allows the user to tailor the light intensity and flash rate to the application.

The WP7113SRD/D LED is a popular choice for user interface applications, as it combines the flexibility of the WS7567 driver IC with the even illumination of the LED emitters. Additionally, the LED emits no ultraviolet or infrared radiation, making it safer for eyesight. The LED is also readily available in both SMT and through-hole packages, making it an ideal choice for PCB design.

The WP7113SRD/D LED is a great choice for applications requiring even illumination, a wide range of intensity, and a high level of flexibility in operation. Whether used for user interfaces, industrial or automotive applications, or medical devices, the WP7113SRD/D provides the reliable performance and durability that is expected from a high quality LED indicator.

The specific data is subject to PDF, and the above content is for reference