WTB4-3F2162

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optical Sensors – Photoelectric, Industrial – are used for applications such as motion detection and switches in home automation, factory automation, and electronics applications. These sensors detect light and convert it into electrical signals, allowing for measurement, control, and automation of processes. The WTB4-3F2162 is a optical sensor, solution made for industrial automation applications. This article will discuss the application field and working principle of this optical sensor.

The WTB4-3F2162 optical sensor is designed for applications such as proximity sensing, safety guarding, and distance/position sensing. The sensor has a photodiode built in, which is used to detect incoming light. The photodiode converts light energy into electrical energy, which is then processed by the internal circuit. The circuit sends a digital signal when the laser is on (no light) and a digital signal when the laser is off (detected light).

This sensor has a number of features that make it attractive for industrial automation applications such as a long operating distance (up to 17m), self-contained chip processing view and position determination in a single module, and adjustable laser light output power. The WTB4-3F2162 also features a high speed response time of less than 10ms, high sensitivity of 0.09mV/lux and a low power consumption of just 3-5mA.

The working principle of the WTB4-3F2162 involves the use of a photodiode in the internal circuit of the optical sensor. The photodiode is a light-sensitive semiconductor device that converts photons into electricity. When light is applied to the photodiode, electrons are released from the valance band. The voltage that is created is then used to measure and detect the presence of light.

The WTB4-3F2162 also uses a laser to emit light into the area to be monitored. When a reflector is in the light beam, some of the light is reflected back onto the sensor, producing a current in the photodiode. This current is then amplified and converted into a digital signal, which is then sent to a controller. The controller then interprets this signal and used to detect the presence or absence of objects.

In addition to the photodiode and laser, the WTB4-3F2162 also consists of a lens and a processing unit. The lens is used to focus the light beam and make it easier to detect objects, while the processing unit converts the signals from the photodiode into a digital signal for the controller to read. This allows for accurate detection of objects in the light beam even in conditions where lighting conditions are poor.

The WTB4-3F2162 is a versatile and reliable optical sensor solution for industrial automation applications. Its ability to detect light and convert it into electrical signals allows for precise detection, measurement, and control of processes. Its long detection distance, adjustable laser light output, and high sensitivity make it an attractive option for a variety of applications. Furthermore, its compact size and low power consumption make it a cost-effective solution for a variety of industrial automation systems.

The specific data is subject to PDF, and the above content is for reference