WW12BT1R50

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

Resistors are an integral part of any circuit and are one of the most commonly used electrical components. Through hole resistors are a type of resistors designed for mounting on printed circuit boards and are used in a variety of applications. The WW12BTF1R50 is a type of Through Hole Resistor which has a wide range of applications and uses in a variety of industries and applications.

Description

WW12BTF1R50 Through Hole Resistor is a metal film resistor with a 12mm body size and a 5mm lead length. This resistor is designed for mounting on printed circuit boards and has a 4-pin configuration. The WW12BTF1R50 is a low-power resistor with a maximum power rating of 0.5 W. It is a non-inductive device with a maximum current rating of 1.05 A. The resistor has a high voltage rating of 3000 V. It also has a high dielectric strength of 1000 V/ms. The WW12BTF1R50 has a tolerance rating of ±1% and is available in a wide range of resistance values from 1 ohm to 1 Mohm.

Applications

The WW12BTF1R50 Through Hole Resistor has wide range of applications including but not limited to automotive, industrial, consumer, and communication applications. Some of these applications include motor production, power supply, circuit protection, signal routing, radio frequency interference suppression, power transmission, and other specialized applications. This resistor is also used for audio and control systems, biomedical applications, and other precision measurements.

Working Principle

The working principle of the WW12BTF1R50 Through Hole Resistor is based on the principle of electrical resistance. This means that when a current is applied to the resistor, the voltage across it is proportional to the current. The resistance of the resistor is determined by the proportion between the voltage applied to it and the current passing through it. This means that as the current increases, the voltage across the resistor increases proportionally. The resistor is designed to resist or reduce the flow of the current. The rate at which current is reduced will depend on the resistance value of the resistor. The higher the resistance value, the higher the resistance to the flow of current.

The resistor is also designed to dissipate power. When current passes through the resistor, some of the energy is converted to heat. This heat is then dissipated into the surrounding environment, thus keeping the resistor from operating at higher temperatures. The resistor is also designed to have a low temperature coefficient, which means that its resistance only changes marginally when the temperature variation is small.

Conclusion

The WW12BTF1R50 Through Hole Resistor is a low-power, high-precision device with a wide range of applications in a variety of industries and applications. It is designed to resist or reduce the flow of current, and its resistance is proportional to the voltage applied to it. The resistor also dissipates power as heat into the surrounding environment, and its temperature coefficient is low. This makes it a suitable component for a variety of applications.

The specific data is subject to PDF, and the above content is for reference