WW12FT1R33

Series:	WW
Packaging:	Tape & Reel (TR)
Part Status:	Active
Resistance:	1.33 Ohms
Tolerance:	±1%
Power (Watts):	0.4W
Composition:	Wirewound
Features:	Moisture Resistant
Temperature Coefficient:	±50ppm/°C
Operating Temperature:	-55°C ~ 350°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.110" Dia x 0.312" L (2.79mm x 7.92mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

WW12FT1R33 is a model of through hole resistor. In this article, we will focus on the application field and working principle of WW12FT1R33.

Application Field

WW12FT1R33 through hole resistor is often used to measure AC voltage and current in alternating current circuits. The resistor provides accuracy, stability, and thermal stability. It is necessary to select a suitable through hole resistor such as WW12FT1R33. This series of through hole resistors provide a wide range of resistance value range(1-10G ohms). Therefore, they are suitable for practical engineering use.WW12FT1R33 through hole resistor is mainly used in a variety of testing and measuring applications such as static current measurement, dynamic current measurement, frequency measurement, and frequency division. It is also used in the fields of automotive control, auditory diagnosis, and Radio Frequency (RF) measurements.

Working Principle

The working principle of WW12FT1R33 through hole resistor is based on ohmic conduction. In a circuit, electrons move by the application of a voltage across the resistor to reduce the voltage. As electrons pass through the resistor, they create an electrical field that opposes the current flow through the resistor. This electrical field causes some of the electrons to leave the resistor, resulting in a decrease of current. The resistance of a resistor is determined by its physical characteristics, such as its length, cross-sectional area, and material used.WW12FT1R33 through hole resistor is made of ceramic material, is covered by a metal film with a specific thickness and a resistance range from 1-10 G ohms. The resistor has a non-inductive structure, which can effectively reduce the noise and waveform distortion of the circuit.

Conclusion

In conclusion, WW12FT1R33 through hole resistor is a type of resistor designed for high accuracy and stability. It is mainly used in AC voltage and current measurement applications, and suitable for a wide range of resistances. The working principle of WW12FT1R33 through hole resistor is based on ohmic conduction. It is made with a ceramic material, and covered by a metal film with a specific thickness and a resistance range from 1-10 G ohms. It has a non-inductive structure that can effectively reduce the noise and waveform distortion of the circuit.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description