WW1FT23R7

Series:	WW
Packaging:	Tape & Reel (TR)
Part Status:	Active
Resistance:	23.7 Ohms
Tolerance:	±1%
Power (Watts):	1W
Composition:	Wirewound
Features:	Moisture Resistant
Temperature Coefficient:	±20ppm/°C
Operating Temperature:	-55°C ~ 350°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.110" Dia x 0.375" L (2.79mm x 9.53mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors: WW1FT23R7 Application Field and Working Principle Through Hole Resistors are widely used in the electronics industry for resistance applications. As their name implies, Through Hole Resistors are inserted through a drilled hole on a circuit board. The WW1FT23R7 resistor is a Through Hole-type resistor manufactured by Vishay Intertechnology. It has a power rating of 1 watt and resistance values between 1.5 Ohms to 2.7 KOhms. The Terminator resistor, as its name suggests, is designed for terminating microstrip signal line circuitry. Its terminals are connected to the copper substrate by two soldered pins. It can be used in both linear and switching-mode power supplies and operates over an ambient temperature range of -55°C to +150°C.The WW1FT23R7 resistor has a very low profile, as its pin spacing is only 0.3″. Unlike other resistors, it is mounted directly to the copper substrate and has an insertion depth of 0.2″ allowing for tight placement on crowded PCBs. The WW1FT23R7 resistor features a miniaturization of size and a large range of resistance values. The device is constructed from non-inductive materials and monolithic chips. It also exhibits a high impedance up to 500V/ ?s and fast current rise/fall times.When it comes to performance, the WW1FT23R7 resistor is highly reliable in the most demanding applications. It exhibits excellent temperature stability and high accuracy, meeting EIA-Standards SN-100. The device is also RoHS compliant.When the power is applied, the WW1FT23R7 resistor convert electrical energy into thermal energy heat. This takes place as current flows through the resistor, generating resistance. The resistance value is determined by the material used and its geometry.The voltage drop across the WW1FT23R7 resistor is dependent on the current flow and the applicable resistance values. This is calculated using Ohm’s Law which states that the voltage is equal to the current multiplied by the resistance. The WW1FT23R7 resistor also has the ability to dissipate power and provide electrical insulation.In conclusion, the WW1FT23R7 resistor is a highly reliable, Through Hole-type resistor that can be used in a variety of applications. It is constructed from non-inductive materials and monolithic chips, and features a miniaturized size and a large range of resistance values. It also provides excellent thermal stability, high accuracy and fast current rise/fall times.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description