WW1JTR430

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The WW1JTR430 Through-Hole Resistor is an economical, yet reliable, resistive element used in electronic circuitry. This device provides a static electric resistance, which can be varied and adjusted according to the desired operation. This device is manufactured in two basic configurations, a fixed type and a variable type.

The fixed type is usually identified by a series of four numerals. The first two digits indicate the significant figures of resistance, and the final two digits indicate the number of zeros following the significant figures. Since the resistor is constructed with a solid insulating material, the voltage rating can be applied to any resistor under the WW1JTR430. Commonly used voltage ratings are from 2.5 volts to 250 volts.

The variable type is usually identified by a series of three numerals. These indicate the significant figures of resistance plus the number of zeros following them. The voltage rating is the same as that of the fixed type. By adjusting the wire-wound element, the resistance can be varied over a certain range. Thus, either a positive or negative resistance slope can be obtained.

In its operation, the WW1JTR430 Through-Hole Resistor is designed to produce a given resistance when connected to a circuit. This resistance can either be fixed or adjustable, depending on the type. When a voltage is applied across the terminals of the resistor, an electric current will flow, dependent upon the magnitude of the applied voltage. The value of the current is proportional to the applied voltage, and is determined by the magnitude of the resistor\'s resistance.

For any given voltage, the electric current produced is always the same, as long as the resistance of the resistor remains constant. Thus, regardless of the number of resistors used in a circuit, the total current produced will always be equal to the sum total of all the individual currents.

The WW1JTR430 Through-Hole Resistor is widely used in virtually all types of electronic circuitry for regulating voltage, dissipating power, protecting circuits, and providing a known impedance. This device is suitable for use in both AC and DC circuits, and is available in a variety of physical forms and sizes.

Because of its reliability and low cost of manufacture, the WW1JTR430 Through-Hole Resistor is an ideal choice for a wide range of applications. This device is available in many different resistance ranges, and is an excellent choice for circuits which require a reliable, adjustable resistance component.

The specific data is subject to PDF, and the above content is for reference