X24-019PKC-U

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF receivers, transmitters, and transceivers are specialized radio frequency (RF) hardware devices designed to receive, transmit, and exchange outgoing and incoming signals over a wider range of RF frequencies than their analogue counterparts. The X24-019PKC-U is a finished unit that consolidates various RF components into an integrated circuit, thus reducing cost, simplifying system design, and providing better overall performance. In this article, we will discuss the application fields of the X24-019PKC-U and how the device works.

Application fields

The X24-019PKC-U is ideal for a wide range of portable consumer and wireless applications, such as wireless local area networks (WLANs), personal area networks (PANs), cellular telephone systems, and short-range two-way radios. It contains an integrated oscillator, mixer, IF amplifier, baseband processor, power amplifier, and low-noise preamplifier, all on a single chip.

The device is designed for use in two primary application fields:

• Wireless Local Area Network (WLAN): The X24-019PKC-U is a practical solution for WLAN applications. It supports 802.11a/b/g/n/ac and 802.11ax WLAN standards, and it can be used for WLAN network access points (APs) and other points of deployment
• Personal Area Network (PAN): The X24-019PKC-U is also well suited for PAN applications. It supports Bluetooth 2.1, Bluetooth low energy (BLE) 4.0, and other ultra-low power PAN standards. It can be used for wi-fi enabled smartphones, smart wearable devices, and other Bluetooth-enabled consumer electronics.

Working principle

The X24-019PKC-U is an integrated RF transceiver that operates on a single chip. It combines all the components necessary for wireless communication: the antenna, oscillator, mixer, power amplifier, and a few other essential components. The device consists of three main parts: the RF front-end, baseband processor, and power amplifier.

RF Front End: The RF front-end is responsible for receiving the incoming RF signals. It contains an oscillator, a mixer, a low-noise amplifier, and an RF circulator. The oscillator generates a signal that is frequency-divided and sent to the mixer. The mixer combines the incoming RF signals with the output from the oscillator. The combined signal is amplified and filtered by the low-noise amplifier and then received by the circulator.

Baseband Processor: The baseband processor is responsible for performing various ambient noise cancellation and signal conditioning operations. It uses digital signal processing (DSP) algorithms to decode and process the received signal. It then modulates the processed signal for transmission.

Power Amplifier: The power amplifier provides the necessary RF power for transmission. It amplifies the modulated signal to the desired level and sends it to the antenna for transmission.

The X24-019PKC-U is a highly integrated single-chip transceiver that simplifies system design and reduces overall cost. It provides wide-band reception and highly efficient transmission with ultra-low power consumption. With its all-in-one solution, the device is ideal for portable consumer and wireless applications.

The specific data is subject to PDF, and the above content is for reference