X9241AWSIZT1

Memory Type:	Non-Volatile
Base Part Number:	X9241A
Supplier Device Package:	20-SOIC
Package / Case:	20-SOIC (0.295", 7.50mm Width)
Operating Temperature:	-40°C ~ 85°C
Resistance - Wiper (Ohms) (Typ):	40
Temperature Coefficient (Typ):	±300 ppm/°C
Tolerance:	±20%
Features:	Selectable Address
Voltage - Supply:	5V
Series:	XDCP™
Interface:	I²C
Resistance (Ohms):	10k
Number of Taps:	64
Number of Circuits:	4
Configuration:	Potentiometer
Taper:	Linear
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The digital potentiometer X9241AWSIZT1 is an excellent choice of data acquisition device for a wide range of applications. Used mainly in industrial, automotive and aerospace uses, it provides reliable and accurate resistance measurements.This device is also commonly employed as a digital version of the resistive bridge, with the potential divided into digital code steps that can be inputted independently. The digital potentiometer can be programed via an input port and software, allowing it to be easily adjusted. The programming can be defined as a single-set calibration or multiple-set resources, and it can operate over wide voltages and temperatures.The main components of the X9241AWSIZT1 include a printed circuit board with a two-wire connection, a 10k-ohm NTC (Negative Temperature Coefficient) resistor, and a logic circuit. This small device is able to measure resistance from 0-10k Ohms and contains a high resolution of 256 steps. In addition, the circuitry is low power consumption and can dissipate up to 8V.The working principle of the X9241AWSIZT1 used for DC measurements is as follows. The resistor is connected to the power supply, and a voltage output is sent to the digital potentiometer. The voltage output is converted to a digital code and the coded data is collected in a memory. Then the digital code is converted back to a resistance value which is used as the measurement output.This digital potentiometer is mainly used in automotive, industrial, aerospace and other fields. It is mainly used in applications such as motor controls, robotic systems, and linear actuators. In motor control applications, it can be used as a variable resistor to control the speed, torque, and direction of the motor. In robotic systems, it can be used to adjust the acceleration and deceleration. In linear actuators, it can be used to adjust the length and force of the actuator.In addition, the X9241AWSIZT1 is also used in closed-loop control, which is the method of electronically controlling a process to keep it within a defined setpoint range. For example, it can be used to regulate the temperature of a system. The digital potentiometer can compare the output of the system with a setpoint and then adjust the resistance accordingly. This helps to ensure that the system remains within the desired range and reduces the amount of manual intervention required.In conclusion, with its small size, low power consumption, wide voltage range and high-resolution 256 steps, the X9241AWSIZT1 is an ideal digital potentiometer for data acquisition in a variety of different applications. It can be used in automotive, industrial, aerospace, and other fields for DC measurements, motor control, robotics, linear actuators, and closed-loop control.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description