X9317TM8I-2.7T1

Memory Type:	Non-Volatile
Base Part Number:	X9317
Supplier Device Package:	8-MSOP
Package / Case:	8-TSSOP, 8-MSOP (0.118", 3.00mm Width)
Operating Temperature:	-40°C ~ 85°C
Resistance - Wiper (Ohms) (Typ):	400
Temperature Coefficient (Typ):	±300 ppm/°C
Tolerance:	±20%
Features:	--
Voltage - Supply:	2.7 V ~ 5.5 V
Series:	XDCP™
Interface:	Up/Down (U/D, INC, CS)
Resistance (Ohms):	100k
Number of Taps:	100
Number of Circuits:	1
Configuration:	Potentiometer
Taper:	Linear
Part Status:	Obsolete
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Data Acquisition - Digital Potentiometers

Digital potentiometers are widely used in many applications, specifically in the areas of data acquisition and communication systems. X9317TM8I-2.7T1 is a digital potentiometer, electronically programmable with digital logic protocol and an industry-standard interface. It is a single-channel digital potentiometer with resistance denominations of 200Ω, 1kΩ, 2kΩ and 4kΩ.X9317TM8I-2.7T1 is used to adjust resistive loads in systems such as analog-to-digital converters, oscillators, and filters. It is also commonly used for measuring current or voltage. It can be programmed via the customized website interface or with commands from the customer module. The device is designed to operate with a wide range of voltages; therefore it is suitable for applications in DC, AC and adjustable power supplies.The device is mainly used in data acquisition and communication systems due to its ability to adjust the resistor load for analog-to-digital (ADC) converters, as well as to change the reference voltage for oscillators. The X9317TM8I-2.7T1 digital potentiometer also simplifies system tuning and calibration requirements by providing an easy and reliable method to dynamically adjust resistance values. Furthermore, it accelerates Signal-to-Noise Ratio (SNR) testing and boosts the effectiveness of automated test procedures.The physical size and power usage of X9317TM8I-2.7T1 is relatively small so it can fit into tight spaces, even in the smallest of devices. It has an integrated power regulator and operates with a wide range of supply voltages, making it perfect for a range of devices and applications.In terms of its operation, X9317TM8I-2.7T1 works by allowing the customer to control the resistance value of a channel. It is mainly controlled by its onboard memory, which is capable of storing up to 1024 resistance values between 0Ω and its maximum limit. In order to adjust the current value of the resistor, the customer runs a series of commands that set the output of the circuit to match the desired resistance value. For example, the device can be set up to provide a resistance from 0Ω to its maximum limit by adjusting the size of a resistor up to the desired level. It then adjusts the voltage that flows in the circuit to match the device’s measurement and resistance value.The X9317TM8I-2.7T1 digital potentiometer also comes with an industry standard interface which allows the customer to communicate with their device using a simple command set. In order to do this, the customer will need to install the correct software and hardware in order to get the device to interface with the customer’s system. The device is also useful for calibrating circuits by providing engineers with a way to dynamically adjust the resistance value of any given circuit. It eliminates the need for manual calibration of every circuit, allowing engineers to adjust the resistor values in a fraction of the time it takes to manually adjust resistors in a circuit.Finally, the X9317TM8I-2.7T1 is also a great choice for low cost and low power applications. It consumes only a fraction of power compared to other digital potentiometers and its size makes it very easy to integrate into portable devices.In conclusion, the X9317TM8I-2.7T1 digital potentiometer is perfect for data acquisition and communication systems due to its adjustable resistance, wide range of supply voltages, onboard memory, and industry-standard interface. It also offers low cost and low power usage, making it an ideal choice for use in small devices. Engineers can also benefit from its ability to calibrate circuits in a fraction of the time it takes to manually adjust resistors.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description