X9317TPI-2.7

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The X9317TPI-2.7 is a Digital Potentiometer which is a form of data acquisition. It is used in various applications and its working principle is based on the alteration of resistance values through an interface.

A traditional potentiometer is a three-terminal device; one is usually considered the ground while the other two terminals provides a voltage. A digital potentiometer is easier to setup and replaces the wiper terminal with a digital control interface. This digital control is what allows the user to alter the resistance of the potentiometer.

In order to achieve a preset resistance, the X9317TPI-2.7 digital potentiometer utilizes a few components: a comparison circuit, two amplifier circuits, and an analog-to-digital converter (ADC). The ADC takes the information from the external control interface and transmits it to the comparison circuit. From there, the comparison circuit will compare the desired wiper position with the actual wiper position.

If there is a difference, the comparison circuit will alert the two amplifier circuits. These amplifier circuits will then work together to increase or decrease the voltage being supplied to the wiper terminal until the desired resistance is reached. The whole process is then repeated whenever the external control interface is updated.

When it comes to applications, the X9317TPI-2.7 is used primarily in CPU voltage and frequency scaling, as well as low-noise analog signal attenuation applications. CPU voltage and frequency scaling allows the CPU to reduce power consumption during low-intensity tasks, allowing longer battery life in laptops, while the low-noise analog signal attenuation is used to control the insertion loss of analog signal paths which can create distortion.

Another application it is used in combination with other devices is audio applications. As the digital potentiometer can accurately set the volume of an audio signal, it is often used as a tool for setting the pre-amp of audio applications. The ability for the digital potentiometer to accurately set the resistance and not drift does wonders for producing low-noise, distortion-free audio.

In summary, the X9317TPI-2.7 is a digital potentiometer which is used in data acquisition applications. Its working principle involves a comparison circuit, two amplifier circuits and an ADC, which allow it to accurately alter the resistance of the potentiometer when given a slight voltage change. It is primarily used in CPU voltage and frequency scaling, low-noise analog signal attenuation, and audio applications.

The specific data is subject to PDF, and the above content is for reference