XA-M14-CS2P-A

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF receiver, transmitter, and transceiver finished units are highly advanced components that integrate a radio frequency (RF) chip, an RF amplifier and a power amplifier into a single, low-cost integrated device. These devices are used in a wide variety of applications, such as cell phones, communication systems, navigational aids, and medical equipment. The XA-M14-CS2P-A is an example of a RF receiver, transmitter, and transceiver finished unit that is used in a variety of applications.

The XA-M14-CS2P-A is a fully integrated RF receiver, transmitter, and transceiver finished unit with a wide range of operating frequencies and data rates. It features a two-stage amplifier consisting of a high gain transistor and a low-noise amplifier, providing an effective sensitivity of 10 dBm at 900 MHz. The unit is designed for use in small cell and distributed antenna systems, and is capable of operating in both digital and analog modes.

The XA-M14-CS2P-A’s receiver and transmitter circuits are designed to operate over a wide range of frequencies, allowing for the transfer of both analog and digital signals. The receiver is tuned to the transmitter’s frequency, and when data is received, the signal is amplified, filtered, and demodulated. The transmitter converts the digital data into an analog signal which is then transmitted over UHF, VHF, and cellular frequencies. The transponder is designed to provide reliable communications over extended distances up to hundreds of kilometers.

The unit also features a power amplifier that is capable of delivering 10 watts of RF power-amplified by a high gain transistor for increased efficiency. The amplifier is capable of providing an effective sensitivity of 4 dBm at 900 MHz, and is designed to operate over a wide frequency range. Additionally, the unit has the capability to operate in both digital and analog modes.

The XA-M14-CS2P-A is an ideal RF receiver, transmitter, and transceiver finished unit for use in a variety of wireless communication applications. It is suitable for small cell, distributed antenna systems, navigation systems, and other applications where low power and high throughput are required. Additionally, the unit is designed to be reliable and easy to use.

The specific data is subject to PDF, and the above content is for reference