XA-M14-CS2P-W Allicdata Electronics
Allicdata Part #:

XA-M14-CS2P-W-ND

Manufacturer Part#:

XA-M14-CS2P-W

Price: $ 0.00
Product Category:

RF/IF and RFID

Manufacturer: Digi International
Short Description: XBEE PRO DIGIMESH 2.4 232 ADAPT
More Detail: RF
DataSheet: XA-M14-CS2P-W datasheetXA-M14-CS2P-W Datasheet/PDF
Quantity: 1000
1 +: 0.00000
Stock 1000Can Ship Immediately
$ 0
Specifications
Series: *
Part Status: Obsolete
Description

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The XA-M14-CS2P-W is a RF Receiver, Transmitter, and Transceiver Finished Units, typically used in a variety of applications. The unit includes a pre-amplifier, low-noise amplifier, filter, detector, modulator, mixer, and an adjustable frequency synthesizer.

The main function of the receiver is the reception of a signal from a distant source. The XA-M14-CS2P-W uses a down-conversion of the radio frequency signal from a higher-frequency to a lower intermediate frequency. This down-conversion is accomplished with a mixer and an IF amplifier. The signal is then passed through a filter for further amplification. The signal is then demodulated and the information is converted into digital form.

The transmitter portion converts incoming digital data into an analog radio frequency signal for transmission. First, the data is modulated onto a carrier frequency with an oscillator. The signal is then filtered and amplified. The output power of the signal is adjusted with an adjustable gain amplifier. The signal is then fed to the antenna for transmission.

The transceiver function is performed by combining the receiver and transmitter sections. Data is received and transmitted simultaneously by using the same antenna. The signal is demodulated and the information is extracted from the received signal. The same antenna is then used to transmit the extracted information in digital form.

The output of the XA-M14-CS2P-W is fed directly to a receiver for further amplification and filtering. This output is amplified further with the addition of an external IF amplifier or other suitable device. The output of the device can be connected to an antenna via coaxial cable or other suitable interface for transmission or reception of radio frequencies.

The XA-M14-CS2P-W is suitable for use in a variety of applications such as radio, television, cellular and satellite communication systems. It is also used in military, medical, research, and industrial applications. The unit is also used in vehicles for vehicle tracking and for air traffic control communication.

The XA-M14-CS2P-W is a versatile and compact unit with a good performance. It is designed to be easy to use and install in a variety of applications. It is also very reliable and durable. The unit is designed to work over a wide range of frequencies, which makes it suitable for a variety of applications and applications needs.

The specific data is subject to PDF, and the above content is for reference

Latest Products
MTD-EV3-N16

EV-DO USB CELLULAR MODEM AERISRF Transce...

MTD-EV3-N16 Allicdata Electronics
XH9-009PKC-R

9XSTREAM 100MW RS232/485 9600BPSRF Trans...

XH9-009PKC-R Allicdata Electronics
MTCBA-C-N12-NAM

MODEM CDMA US BUNDLE IPRF Transceiver, C...

MTCBA-C-N12-NAM Allicdata Electronics
XC09-038PKC-RA

MODEM RF 900MHZ RS232/485 W/ACCRF Transc...

XC09-038PKC-RA Allicdata Electronics
317990016

EASYRADIO 433MHZ USB TRANSMITTERRF Trans...

317990016 Allicdata Electronics
RFD21783

RF TRANSCEIVER 2.4GHZ KEYFOBRF Transmitt...

RFD21783 Allicdata Electronics