XB3-24ARM-J RF/IF and RFID |
|
Allicdata Part #: | 602-2198-ND |
Manufacturer Part#: |
XB3-24ARM-J |
Price: | $ 10.19 |
Product Category: | RF/IF and RFID |
Manufacturer: | Digi International |
Short Description: | RF TXRX MODULE ZIGBEE BLE |
More Detail: | N/A |
DataSheet: | XB3-24ARM-J Datasheet/PDF |
Quantity: | 82 |
1 +: | $ 9.26100 |
Sensitivity: | -103dBm |
Package / Case: | 34-SMD Module |
Mounting Type: | Surface Mount |
Current - Transmitting: | 40mA |
Current - Receiving: | 15mA |
Voltage - Supply: | 2.1 V ~ 3.6 V |
Memory Size: | 1MB Flash, 128kB RAM |
Utilized IC / Part: | -- |
Antenna Type: | Not Included, Castellation |
Serial Interfaces: | I²C, SPI, UART |
Series: | XBee3™ |
Power - Output: | 8dBm |
Data Rate: | 250kbps |
Frequency: | 2.4GHz |
Modulation: | -- |
Protocol: | Bluetooth v4.0, Zigbee® |
RF Family/Standard: | 802.15.4 |
Part Status: | Active |
Packaging: | Tray |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
RF Transceiver Modules are widely used in technology and communication today. One particular type of RF Transceiver Module is the XB3-24ARM-J. This article will discuss the application field and working principle of the XB3-24ARM-J.
The XB3-24ARM-J transceiver module is designed to be embedded into wireless communication systems for long range operations. This transceiver module allows for the transmission and reception of a variety of communication signals, including GPRS, EDGE, 3G, HSPA, and LTE. It is also suitable for other applications, such as Zigbee, Bluetooth, and Wi-Fi.
The XB3-24ARM-J module has two modes that it can operate in – DRX (downlink receive) and DTX (downlink transmit). The DRX mode can be used for receiving data and the DTX mode can be used for transmitting data. The DRX mode can receive data at up to 4Mbps and the DTX mode can transmit at up to 6.5Mbps. Additionally, the XB3-24ARM-J can be used for high-resolution audio and video streaming.
The XB3-24ARM-J transceiver module is highly efficient and energy saving, with an average power consumption of 9.5 watts. It has a radio frequency (RF) power output of up to 24dBm, which allows the module to reach wider coverage areas. Its operating temperature range is between -30℃ and +85℃, so it can be used in a wide variety of applications and environments.
The XB3-24ARM-J transceiver module is a powerful device that utilizes a number of technologies to ensure reliable communication. Firstly, it employs multiplexed channels (TDMA), which allow for concurrent transmissions on the same frequency. Additionally, it has a high level of automatic gain control (AGC), which helps it to overcome any interference caused by other radio frequencies in the area. Lastly, the XB3-24ARM-J utilizes Frequency Hopping Spread Spectrum (FHSS) technology, which further increases its reliability and coverage.
The XB3-24ARM-J module can also be used for a number of applications, such as remote sensing, voice and data communications, and industrial automation. It is also widely used in wireless access points and base stations. Additionally, it is compatible with a number of applications and systems, such as the Ericsson G-2, 3GPP, LTE, DLNA, and Bluetooth.
In conclusion, the XB3-24ARM-J transceiver module is a powerful and reliable RF transceiver module that is suitable for a wide range of applications. It is highly energy efficient, has wide coverage capabilities, and is compatible with a number of different systems and applications. With all these benefits, the XB3-24ARM-J is sure to be a powerful addition to any wireless communication system.
The specific data is subject to PDF, and the above content is for reference
2.4GHz transceiver, 64MHz Arm Cortex M4F...
ENET-ZBP113 ZIGBEE MODULE
RF TXRX MODULE ISM>1GHZ U.FL ANT
RF TXRX MOD BLUETOOTH/WIFI U.FL
RF TXRX MOD CELLULAR/NAV U.FL
RF TXRX MODULE ISM ...