XLH736184.430000I

Frequency Stability:	±25ppm
Current - Supply (Disable) (Max):	--
Height - Seated (Max):	0.055" (1.40mm)
Size / Dimension:	0.295" L x 0.205" W (7.50mm x 5.20mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	55mA
Operating Temperature:	-40°C ~ 85°C
Series:	XPRESSO™ FXO-HC73
Voltage - Supply:	3.3V
Output:	HCMOS
Function:	Enable/Disable
Frequency:	184.43MHz
Type:	XO (Standard)
Base Resonator:	Crystal
Part Status:	Active
Packaging:	Strip

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators: XLH736184.430000I Application Field and Working Principle

Oscillators are electrical, mechanical, or electronic devices that generate repetitive signals without any inputs. They are generally used when a specific frequency or signal is needed and an input signal of the correct frequency is not available. The XLH736184.430000I is a type of oscillator that has a wide range of applications and is widely used. This article will discuss the application field of the XLH736184.430000I as well as its working principle.

Applications of the XLH736184.430000I

The XLH736184.430000I is an oscillator that is used in a variety of different applications and devices. It is widely used in communication systems, radio broadcasts, and clock signals. Additionally, it is very useful for testing and troubleshooting frequency devices, as it can be used to accurately measure the frequency of signals and other devices. Finally, it is often used for synchronization purposes, such as for synchronization of radio stations.

Working Principle of the XLH736184.430000I

The working principle of the XLH736184.430000I is based on the principle of feedback. The circuit contains an amplifier, a resistor, and a capacitor. The capacitor and resistor form an RC circuit which produces a delayed, or lagging, signal. This lagging signal is then fed back into the amplifier. As the signal is fed back, it is amplified which causes it to come out at a higher amplitude. This amplified signal is then applied to the original RC circuit again and the process repeats. This repeated process can cause oscillations at a desired frequency. In some cases, it may be necessary to adjust the resistor or capacitor in order to achieve the desired frequency of oscillation. It is important to note that the frequency of oscillation will be limited to a range determined by the values of both components. Additionally, the values of both components will also affect the stability and accuracy of the frequency.

Conclusion

The XLH736184.430000I oscillator is a widely used device with a wide range of applications. It is used in communication systems, radio broadcasts, and clock signals. Furthermore, it is often used for testing and troubleshooting frequency devices, as well as for synchronization. The working principle of the oscillator is based on the principle of feedback, where a lagging signal is amplified and fed back into the original RC circuit. This repetition of the signal can cause oscillations at a desired frequency.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description