Frequency Stability:	±50ppm
Current - Supply (Disable) (Max):	--
Height - Seated (Max):	0.055" (1.40mm)
Size / Dimension:	0.295" L x 0.205" W (7.50mm x 5.20mm)
Package / Case:	6-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	120mA
Operating Temperature:	-20°C ~ 70°C
Series:	XPRESSO™ FXO-PC73
Voltage - Supply:	3.3V
Output:	LVPECL
Function:	Enable/Disable
Frequency:	672MHz
Type:	XO (Standard)
Base Resonator:	Crystal
Part Status:	Active
Packaging:	Strip

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators

XLP735672.000000X Application Field and Working Principle

Oscillators are electrical circuits that produce a continuously repeating waveform at a certain frequency. Oscillators can be used in many different fields, such as timekeeping, signal generation, vibration control, and electronic noise damping. The XLP735672.000000X oscillator is an oscillator designed for ultra-low power applications.The XLP735672.000000X oscillator is an integrated circuit designed for low-power applications. The integrated circuit contains a frequency-controlled oscillator, a resistor divider, and a voltage supply circuit. The frequency-controlled oscillator produces a precise frequency signal based on the resistance values set by the resistor divider. A built-in timer allows the oscillator to maintain its frequency despite changes in temperature and other environmental conditions. In addition, the circuit is designed to reduce power consumption by shutting down the circuit in periods of no activity or when the battery voltage drops below a certain level.The XLP735672.000000X oscillator is mainly used in medical applications and electronics control systems, where low power consumption is essential. In medical applications, the oscillator can be used to induce a signal for medical diagnostics or therapy. In electronics control systems, the oscillator is used to control frequencies in power supplies and signal detection. The oscillator is also used in radio frequency (RF) devices, where it helps to regulate the frequency of transmitted and received signals. The working principle of the XLP735672.000000X oscillator is based on the principles of frequency control. Frequency control is the process of adjusting the frequency of an oscillator to a set frequency or range. The oscillator is made up of several components, including an oscillator circuit, a resistor divider, and a voltage supply circuit. The oscillator circuit consists of a quartz crystal, which is used to produce a precise frequency, and an amplifier, which amplifies the frequency produced by the quartz crystal. The resistor divider is used to adjust the frequency range of the oscillator, while the voltage supply circuit is used to provide the voltage required to operate the components.The resistor divider is used to adjust the frequency of the oscillator and is composed of several resistors. The resistors are of different values and can be adjusted to produce different frequencies. When the oscillator is connected to a power source, a voltage is applied to the resistor divider. The resistance of the resistors will cause the frequency of the oscillator to fluctuate, depending on the voltage applied.When the voltage is applied, the frequency of the oscillator will begin to fluctuate. The oscillator will move between the maximum and minimum frequencies until it converges on the set frequency. Once the oscillator reaches the set frequency, it will remain constant until the frequency is changed again.The XLP735672.000000X oscillator is a highly efficient and reliable oscillator for ultra-low power applications. Its adjustable frequency range and built-in timer make it ideal for medical and electronics control applications. Its low power consumption and high performance make it a valuable tool for radio frequency applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description