XR16C2852CJTR-F

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The XR16C2852CJTR-F is a universal asynchronous receiver/transmitter (UART) that is used for high-speed data transmission between computing devices and other serial communication systems. It is used to achieve efficient and reliable communication between different components and peripherals, both within and between systems, in a wide range of applications.

The XR16C2852CJTR-F is designed to meet short latency requirements, high speeds, and enhanced power savings. It has a 40MHz clock frequency and supports a data transmission rate of up to 4 Mbps. The UART is capable of operating in full-duplex (2-way) and half-duplex (1-way) modes. It has 256 bytes of on-chip FIFO (First-In, First-Out) buffer, programmable UART data length, and configurable baud rate.

The XR16C2852CJTR-F UART can be used for a variety of applications, including industrial automation, medical equipment, instrumentation hardware, office automation, and other embedded systems. In industrial automation, for example, the UART can be used for data transfer between the control unit and programmable logic controllers (PLCs). In medical applications, it can be used to transfer patient data from medical devices to monitoring systems. Similarly, it is also used in industrial process control systems to facilitate communication between the sensors and the central processor.

The XR16C2852CJTR-F uses a multiplexed asynchronous serial communications protocol to transmit and receive data. The protocol is based on a pair of logic lines -- Tx (transmit) and Rx (receive). The UART is responsible for encoding and decoding digital data into serial bit streams, which will be then transmitted and received by the two logic lines. The UART also includes a number of logic blocks that enable the controlling, buffering, and error handling of the serial communication. The hardware components include a baud rate generator, transmit buffer register, receive buffer register, FIFO buffer, and mode control.

The data transmission begins with the start bit. This is then followed by the transmission of the data bits. When all of the data bits and the parity bit (if enabled) are transmitted, the UART sends the stop bit. The length of the transmitting and receiving data packets is determined by the data length and the parity bit. The transmitted and received data will then be stored in the FIFO buffer of the UART until the application requests it.

The XR16C2852CJTR-F also supports hardware-level flow control. This enables the device to avoid data loss by throttling the data transmission rate if the receiver’s buffering capacity is exceeded. The device also includes error detection features, such as parity and framing error checking, which can be used to either report errors or take corrective action.

In summary, the XR16C2852CJTR-F UART is an important component that enables efficient and reliable data transmission between different components and peripherals in embedded systems. It is designed to meet short latency requirements, high speeds, and enhanced power savings. It can be used in a variety of applications, including industrial automation, medical equipment, instrumentation hardware, office automation, and other embedded systems.

The specific data is subject to PDF, and the above content is for reference