Series:	VTA
Packaging:	Bulk
Part Status:	Active
Resistance:	20.2 Ohms
Tolerance:	±1%
Power (Watts):	0.3W
Composition:	Metal Foil
Features:	Non-Inductive
Temperature Coefficient:	±10ppm/°C
Operating Temperature:	-55°C ~ 125°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.260" Dia x 0.500" L (6.60mm x 12.70mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

Through hole resistors are one of the most widely used components in electrical and electronic systems. They are typically small and low cost, making them ideal for a variety of applications.A through hole resistor is an electrical component consisting of an active resistive element with a ferrule, lead frame and outer casing. The active element is usually made of metal or ceramic and can be as small as a few millimeters in diameter. Its resistance value and function are determined by the design and materials used. The size of the resistor depends on the application, but typically ranges from 1/4 inch to 1 inch in diameter.The resistive element is electrically connected to the leads and/or terminals through the ferrule. The lead frame is usually composed of multiple metal connected to each other in an interlocking pattern. This is necessary to ensure that the resistor does not loosen or become disconnected during operation. The ferrule and lead frame are then encased in an insulating material such as mica, glass, epoxy or ceramic.The working principle of a through hole resistor is very simple. It works by limiting the flow of current through it. A resistor works by reducing the electrical current (electricity) that passes through it by adding resistance. This resistance is determined by the design of the resistor, the materials used and the size of the resistor.To use a through hole resistor, it must be properly mounted to the circuit board. This is normally done by soldering the leads of the resistor to the copper pads of the board. Once mounted, the resistor can then be wired into the circuit as required.Through hole resistors can be used in a variety of applications, from simple voltage control to high power current control and RF filtering. Some of the most common applications are automotive electronics (for power steering, temperature control and other vehicle systems), medical electronics (for devices such as artificial organs, pacemakers and defibrillators), and telecommunications (for telephone and other wireless network devices).In summary, through hole resistors are a type of electrical component consisting of a resistive element and a lead frame enclosed in an insulating material. They are used in a range of electrical and electronic applications due to their small size, low cost and ease of installation. Their working principle is based on the fact that they reduce the flow of electrical current by adding resistance.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description