Y0076V0030BA0L

Number of Pins:	3
Height - Seated (Max):	0.525" (13.33mm)
Size / Dimension:	0.398" L x 0.185" W (10.11mm x 4.70mm)
Supplier Device Package:	--
Package / Case:	Radial - 3 Leads
Mounting Type:	Through Hole
Applications:	Voltage Divider (TCR Matched)
Operating Temperature:	-55°C ~ 125°C
Temperature Coefficient:	±2ppm/°C
Power Per Element:	100mW
Series:	VHD144
Resistor-Ratio-Drift:	±0.1 ppm/°C
Resistor Matching Ratio:	±0.05%
Number of Resistors:	2
Tolerance:	±0.1%
Resistance (Ohms):	2k, 18k
Circuit Type:	Voltage Divider
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays

Resistor networks and arrays are composed of a group of individual resistors connected together to form a single electrical device. The number of individual resistors and their values are determined by the application. Resistor networks and arrays can provide lessons or multiple paths for the same electrical current. In addition, they are often employed to divide, or attenuate, a signal voltage. One example of a resistor network or array is the Y0076V0030BA0L, a three terminal non-inverting voltage divider device. This part is primarily used as a voltage divider to reduce a voltage down to a suitable level for processing by subsequent circuit elements. Typical applications of the Y0076V0030BA0L include low voltage single supply data conversion, filtering operations for radio frequency (RF) signals with high speed and low-cost attenuator circuits.

Y0076V0030BA0L Application Field and Working Principle

The Y0076V0030BA0L is suitable for a wide range of applications requiring precision voltage dividers. This device can be used for voltage monitoring, signal conditioning, power management and measurement applications that require voltage attenuation and accuracy.Operation of the Y0076V0030BA0L is based on the distributed resistance principle. Two of the three terminals, labeled ‘A’ and ‘B’, provide the inputs. The third terminal, labeled ‘C’, is the common ground of the device. A resistor of known value is placed between each terminal, forming a voltage divider network. When voltage is applied across the terminals ‘A’ to ‘B’, the resistor network divides the voltage into equal portions. The output voltage at terminal ‘C’ is proportional to the voltage between terminals ‘A’ and ‘B’.The Y0076V0030BA0L offers excellent accuracy over a wide temperature range and a rated maximum voltage of 16 volts. It also features low series resistance and high frequency operation. The device is packaged in a surface mount package that is suitable for automated pick-and-place and surface mount processes.Another key benefit of the Y0076V0030BA0L is that it can be used in combination with other devices, such as operational amplifiers and other analog components, to form a complete system. This combination of components provides the necessary voltage divider function but also increases accuracy and signal gain. Another use of the Y0076V0030BA0L is in the formation of four-terminal networks, which provide more accurate and efficient voltage dividers than traditional two-terminal networks.

Conclusion

The Y0076V0030BA0L is a three-terminal resistor network that is designed for precise voltage attenuation and signal control. It is available in a surface-mount package and features excellent precision and accuracy over a wide temperature range. The device can be used in conjunction with other circuit components for further accurate signal control.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description