Y0114V0512AA0L

Number of Pins:	3
Height - Seated (Max):	0.413" (10.50mm)
Size / Dimension:	0.350" L x 0.138" W (8.90mm x 3.51mm)
Supplier Device Package:	--
Package / Case:	Radial - 3 Leads
Mounting Type:	Through Hole
Applications:	Voltage Divider (TCR Matched)
Operating Temperature:	-55°C ~ 125°C
Temperature Coefficient:	±2ppm/°C
Power Per Element:	400mW
Series:	VFD244
Resistor-Ratio-Drift:	±0.5 ppm/°C
Resistor Matching Ratio:	±0.05%
Number of Resistors:	2
Tolerance:	±0.05%
Resistance (Ohms):	100k, 150k
Circuit Type:	Voltage Divider
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays

The Y0114V0512AA0L is an integrated circuit containing a network of resistors, capacitors, and other components. The resistors are arranged in an array, sometimes referred to as an "RC network." An array is a set of electrically connected components arranged in a pattern, such as a grid, a circle, or a linear. Resistor arrays are used to regulate currents, voltage signals, and provide impedance matching.

Application fields

Y0114V0512AA0L resistor networks are used in many applications, including communications systems, signal processing, automotive and consumer electronics. The integrated circuit is an effective way to control current, voltage, and impedance of many electrical and electronic components. It can also be used in semiconductor device design where it provides resistance to regulate current and/or to reduce voltage. It is also used for voltage division circuits, signal oscillators, and speaker protection circuits.

Working principle

The integrated circuit\'s working principle is based on the properties of resistance. In its simplest form, a resistor network is a group of resistors connected in parallel or in series, and the resistance values of each resistor can be adjusted as desired. When current flows through the resistor network, the electrical energy is dissipated as heat.Resistors in a Y0114V0512AA0L array are typically connected in parallel to reduce the overall resistance at any point in the circuit. As a result, the overall resistance is lower than that of any single resistor in the network. The resistance of each component in the resistor array can be adjusted as desired, which allows the current to be controlled and distributed accordingly. This is useful for controlling the current levels of large circuit components, such as transistors or motors.The resistors in the Y0114V0512AA0L chip can also be used to regulate the voltages of transistors. This is done by connecting a resistor between two transistors and adjusting the resistance value until the desired voltage is reached. This is useful for transistor-switching applications, such as switching an LED on and off.Resistor networks are also important for impedance matching, which allows for better signal transmission. This electrical process is an important tool in signal processing and communications systems. By connecting several resistors in series and in parallel, the required impedance can be achieved. The voltage and current flows between components can then be adjusted, which allows for maximum signal transmission.

Conclusion

The Y0114V0512AA0L integrated circuit is a versatile and powerful tool for electronics engineers. It is used for controlling current, voltage, and impedance, as well as for various other applications, such as signal processing and communications. Its flexibility makes it useful in a wide variety of applications. By carefully selecting and configuring the various components, engineers can create circuits that are powerful and efficient.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description