Y1365V0019QT9W

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays

The Y1365V0019QT9W resistor network is a small and compact device, designed for applications where space is a premium.It is suitable for managing power for space-constrained applications, such as portable electronics, wearable electronics, and IoT devices. Despite its small form factor, it can handle the extreme temperatures generated by these applications.

It is a high performance resistive network, capable of managing power in a number of ways. For example, it can be used as a voltage regulator, a current source, or as a current limiter. It can also be used for protection against over-voltage, over-current, and ground loops. It can be configured in both series and parallel, and can be used for noise filtering, to reduce RF and EMI interference, and for surge protection.

The Y1365V0019QT9W resistor network is a network of ten resistors (six in the external network and four internal) whose resistance values are manually calculated and adjusted. The external resistors are placed on the top of the board and the internal resistors are interconnected on the bottom of the board. The resistors are arranged in a series of three, four, and three sequentially, allowing for three different externally adjustable resistor combinations, with a maximum resistance of 300 Ohms.

The internal resistors provide stability to the network, and are designed with ceramic resistors for increased temperature stability. They also provide additional current balancing, allowing the device to handle heavy current surges. The internal resistors are adjusted by controlling the ratio of resistance between each internal resistor branch threading it through the through-hole pads.

The external resistors are configured to control a wide range of currents. For example, they can be adjusted to provide a current limit of 0.30 mA to 300 mA. The resistance value of these external resistors can be adjusted up to a maximum of 300 Ohms. The voltage drop across the resistive network is controlled by the external resistors. Thus, the device can be used in applications that require either high or low voltage inputs.

The Y1365V0019QT9W residual network is an efficient and cost effective solution. Its simplicity and reliability makes it suitable for a variety of applications, including protection of sensitive electronics, current-limiting for low power applications, and voltage regulation. Its form factor and reliability make it an ideal solution for small, space constrained designs such as wearable electronics and IoT devices.

The specific data is subject to PDF, and the above content is for reference