Y1747V0183QT9W Datasheet/PDFResistor networks, arrays are usually called discrete passive elements in the electronics device industry. The Y1747V0183QT9W is a common example of such elements. It is a low profile, surface mount solution designed for impedance matching circuits, termination networks in small high frequency applications such as sensors and reflex radios.
This circuit utilizes a 4-gain resistor network structure with 100 ohm on each long arm. The ratio between arms is 1:1.029, making the total impedance ratio of 2.058:1. This value is slightly off the desired ratio of 2:1, so the device is calibrated to compensate this offset. The design is composed of four active resistors and one tracking resistor. The active resistors are connected in series and the tracking resistor is connected in parallel between one of the active resistors and the ground. The gain resistors are implemented using high-quality surface mount resistors.
To select the best resistor values for matching, a Z0 is used to determine the impedance of the Y1747V0183QT9W network. To select the proper Z0, the frequency, the frequency\'s range and the required further scattering margin are used. The device has a dynamic range up to 40MHZ, with -30dB rejection over the second harmonics.
The main function of the Y1747V0183QT9W is to provide accurate impedance matching between the two electrical circuits. By using the proper resistor values of the network, a desired ratio of 1:1.029 is obtained. This ratio ensures that the currents in each circuit will be balanced and the transmission of the signal will be maximized. Furthermore, this impedance matching also reduces the effect of the parasitic impedance on the transmission line, ensuring that the signal quality is preserved.
The Y1747V0183QT9W resistor network is widely used in a variety of applications where efficient impedance matching is required. These applications include radio base station antennas, automotive signal processing, sensor systems, and power electronics. In addition, these networks can be used for impedance detection, power conditioning, and power balancing. It is also suitable for use in medical devices, test instrumentation, and consumer electronics.
The Y1747V0183QT9W is usually used in amplified circuits which need clean and noise reduced signals. The impedance matching effects of the resistor network makes sure that the undesired signal is minimized while the desired signal is preserved through the amplifier circuit. This helps to improve the signal clarity and reduces overall noise in the system.
The Y1747V0183QT9W is based on a tracking resistor network design. The network provides the functions of impedance matching, voltage regulation, current regulation, and control of power dissipation. This makes the network suitable for a variety of applications. The resistor network helps to obtain the best possible voltage regulation, current regulation, and power dissipation, while also ensuring that the circuit performance remains stable over the full frequency range.
The Y1747V0183QT9W is a versatile resistor network based on surface mount technology. This device is widely used in various applications, ranging from radio base station antennas to automotive signal processing. Its frequency range goes up to 40MHz, and its ratio between the arms is 1:1.029. The dynamic range is improved by the tracking resistor in the network, providing a -30dB rejection over the second harmonics. The primary function of the Y1747V0183QT9W is to provide efficient impedance matching between two electrical circuits, making it ideal for a variety of applications.