Y4485V0596AQ0L

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor networks, such as the Y4485V0596AQ0L, are a type of resistor array commonly used in most circuits. These networks consist of several resistors that are connected in parallel and/or series. They are used in many applications including radio-frequency (RF) circuits, optical power monitoring, current regulation, and protection circuits. The Y4485V0596AQ0L is a low-cost resistor network in the form of a double in-line package (DIP) which can provide a wide range of resistance values.

A resistor network is an electrically-interconnected group of discrete resistors which are used for connecting two or more points in an electrical circuit. The network is also used to divide, change or regulate a current passing through it. The network may also be used to limit the voltage flowing through the circuit and to reduce interference from other signals.

The Y4485V0596AQ0L is a four-pole resistor network with pins arranged in a single row. It is composed of four resistors which are connected in two series. Each of these resistors has a resistance value of 8.2 ohms. Each pole of the network also has a common ground pin. The total resistance of the network is 32.8 ohms. This network is designed for easy assembly and is rated to handle up to 500 mA of current.

The working principle of the Y4485V0596AQ0L is based on Ohm\'s law. According to this law, the voltage across the resistor network is equal to the current passing through it multiplied by the total resistance. Thus, by changing the value of the resistors in the circuit, the resistance of the entire network can be adjusted and thus the output voltage of the circuit can be regulated.

One of the most common applications of the Y4485V0596AQ0L is in RF circuits. This type of circuit is used to receive and transmit radio frequency signals. The resistor network is used to form an impedance matching network which ensures that the RF signal is amplified properly. It is also used to protect the RF transmission line from overloading.

The Y4485V0596AQ0L is also used in optical power monitoring applications. In this type of application, the resistor network is used to measure the amount of optical power, and then adjust the optical power accordingly. This is usually done to improve the performance of the optical device. The resistor network is also used in protection circuits which are designed to protect the device from overload.

The Y4485V0596AQ0L is also used in current regulation circuits. These circuits are used to regulate the current levels in the circuit, ensuring that the device is not damaged by excessive currents. This is done by changing the resistance value of the resistors in the circuit. Once the current level is set, the resistor network is used to prevent currents from exceeding the set maximum level.

The resistor network is also used to reduce interference from other signals. This is done by connecting the resistors in series, which reduces interference from nearby frequencies. This is also used to improve signal integrity. This is most commonly found in radio frequency circuits.

The Y4485V0596AQ0L is a versatile resistor network, designed for use in many different applications. It is a low-cost and easy-to-assemble resistor network, offering low resistance values and a wide range of resistance values. Its working principle is based on Ohm\'s law, and it is used in RF circuits, optical power monitoring, current regulation, and protection circuits.

The specific data is subject to PDF, and the above content is for reference