YB15NKW01-1F12-JB

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Pushbutton switches are the devices used to control circuits in a wide variety of different electrical and electronic applications. These switches are typically used to turn circuits on and off, and can also be used to control the direction and speed of a motor, as well as various other functions. The YB15NKW01-1F12-JB pushbutton switch is a multi-contact pushbutton switch designed for industrial use, and is a reliable, cost-effective solution for circuit control needs.

YB15NKW01-1F12-JB Specifications

The YB15NKW01-1F12-JB is a standard-sized, momentary contact, multi-contact pushbutton switch. This switch is rated for a maximum load of 5A at 125V AC/28V DC and has a contact resistance of less than 50mΩ. This switch is also IP67 rated and has a mechanical life of 500,000 operations. It is also UL, CSA, and ENEC approved.

YB15NKW01-1F12-JB Application Field

The YB15NKW01-1F12-JB is typically used in industrial and commercial applications, specifically in control panels, electrical junction boxes, and even in laboratory equipment or in medical devices. It is mainly used for controlling motors or for activating circuit relays when it is pressed.

YB15NKW01-1F12-JB Working Principle

When the button on the YB15NKW01-1F12-JB switch is pressed, a momentary contact is made, electrically connecting the two contacts and allowing current to flow. When the button is released, the contacts disconnect, interrupting the circuit and preventing current from flowing. This type of switch is known as a single-pole, single-throw (SPST) switch. The contacts on the switch can be configured as either normally open (NO), normally closed (NC), or changeover (CO).

Conclusion

The YB15NKW01-1F12-JB is a reliable, cost-effective pushbutton switch used to control circuits in a variety of industrial and commercial applications. This switch is rated for a maximum load of 5A at 125V AC/28V DC and is IP67 rated. It is mainly used to activate circuit relays and is a single-pole, single throw (SPST) switch that can be configured for either normally open (NO), normally closed (NC) or changeover (CO) contact configurations.

The specific data is subject to PDF, and the above content is for reference