YC124-JR-0710KL Resistors

Resistor-Ratio-Drift:	--
Height - Seated (Max):	0.022" (0.55mm)
Size / Dimension:	0.079" L x 0.039" W (2.00mm x 1.00mm)
Supplier Device Package:	--
Package / Case:	0804, Convex, Long Side Terminals
Mounting Type:	Surface Mount
Applications:	DDRAM, SDRAM
Operating Temperature:	-55°C ~ 155°C
Temperature Coefficient:	±200ppm/°C
Power Per Element:	62.5mW
Number of Pins:	8
Series:	YC124
Resistor Matching Ratio:	--
Number of Resistors:	4
Tolerance:	±5%
Resistance (Ohms):	10k
Circuit Type:	Isolated
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Digi-Reel®

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays

A resistor network, sometimes called a resistor array, is an electrical circuit composed of a number of resistors in series and/or parallel. It is used to improve circuit performance by providing high impedance, low noise, and resistive and/or capacitive isolation. A resistor network can also be used to limit the current in a load.The YC124-JR-0710KL resistor network is a surface-mount device that consists of three resistors connected in series and four resistors connected in parallel. The resistors are connected in such a way that they form a voltage divider and current limiter. The device has an input impedance of 10 kΩ and an output impedance of 1 Ω.The YC124-JR-0710KL is used in a variety of applications. It can be used as an adjustable voltage dividers, providing adjustable output voltage. It can be used to accurately split a voltage signal in order to provide matched impedances or to improve signal integrity. It can also be used to limit the current in a load.In addition, the YC124-JR-0710KL is used in power supply circuits to provide voltage regulation. The YC124-JR-0710KL has a wide input voltage range, making it well suited for power supply applications.The working principle of the YC124-JR-0710KL is simple. The input voltage is divided between the two series resistors, and then further divided between the four parallel resistors. The output voltage is determined by the voltage drop across the two series resistors, depending on the load current. This output voltage is then limited by a current limiter circuit, which limits the peak current to 1A.The YC124-JR-0710KL is highly reliable, offering excellent electrical performance and long-term stability. It is UL certified and RoHS compliant, making it ideal for use in commercial and medical applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description