YC124-JR-07160RL

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor networks, arrays, and other assemblies can be found in a broad range of applications and often perform the same basic function of providing resistance, isolation, or delay. One such network commonly used is the YC124-JR-07160RL. This component is a 4-Resistor Network featuring low total error and fast response time.

The YC124-JR-07160RL is an array of four resistors contained in a single unit, with each resistor having a value of 0.47 ohms. The resistors all have the same value, so when applied in the same direction, the total resistance of the array is 1.88 ohms. The array is designed so that any changes in the resistance of one of the individual resistors is reflected in the total resistance of the array. This makes the component ideal for use where high accuracy and fast response time are needed.

The YC124-JR-07160RL is commonly used in strain gauge and pressure sensor systems, where its low total error and fast response time make it highly suitable. The array is used to provide a low-impedance bridge for the sensor, and its ability to reflect even small changes in resistance accurately makes it an excellent choice for this application. In this type of system, the array is connected across two known and fixed resistances to provide a bridge for the strain gauge sensor. When the strain gauge is subjected to mechanical force, the resistance of the strain gauge changes, which in turn changes the total resistance of the bridge. This change in resistance is then used to measure the force being applied.

The YC124-JR-07160RL can also be used in other applications, such as providing isolation in current limiting circuits. In this application, the YC124-JR-07160RL is used in conjunction with two other components: a voltage source and a current-limiting resistor. The resistor is connected between the two components, with the YC124-JR-07160RL connected in parallel to the current-limiting resistor. Since the total resistance of the YC124-JR-07160RL is 1.88 ohms, it provides the necessary isolation to ensure that the voltage source is not affected by the current-limiting resistor.

The YC124-JR-07160RL is also used in float charging circuits, where its ability to accurately reflect small changes in resistance is highly beneficial. The float charger circuit uses the YC124-JR-07160RL in conjunction with a battery and a voltage regulator. The battery provides the necessary power to the voltage regulator, while the YC124-JR-07160RL is used to monitor the battery\'s voltage. When the battery\'s voltage drops below a certain point, the YC124-JR-07160RL detects the change and sends a signal to the voltage regulator, which in turn sends a current to the battery to keep it at the desired voltage level.

The YC124-JR-07160RL is also useful in series-parallel circuits, which are used to control the speed of motors. The YC124-JR-07160RL is connected in series with the motor, and the total resistance of the YC124-JR-07160RL is used to control its speed. When the resistance of the YC124-JR-07160RL is increased, the speed of the motor is decreased. Conversely, when the resistance is decreased, the speed increases.

The YC124-JR-07160RL is an extremely versatile component, and it can be used in a variety of applications. Its accuracy, fast response time, and low total error make it an excellent choice for many applications. The fact that it is contained in a single unit, and can be connected in series or parallel, makes it easy to use and install in a variety of settings. It is an invaluable component for any electrical system, and its versatility allows it to be used in a wide range of applications.

The specific data is subject to PDF, and the above content is for reference