YC124-JR-0756RE

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays

The YC124-JR-0756RE connected array is a special type of resistor network consisting of resistor elements connected in a pre-defined pattern. It provides a means of determining the equivalent resistance between two nodes in an electrical network. This resistance is determined by the number and values of the resistor elements that are connected between the input and output terminals.

The YC124-JR-0756RE array consists of five identical resistor elements, each with a value of 200 ohms. The resistor elements are arranged in a triangular pattern as shown in Figure 1. The three sides of the triangle are referred to as S1, S2 and S3. The three resistors on each side of the triangle constitute a resistor leg.

The YC124-JR-0756RE is typically used in a variety of applications, such as voltage dividers, current limiting applications, and load balancing applications. In these applications, the resistance of the array determines the amount of current that can be passed through it.

The working principle of the YC124-JR-0756RE array is based on the principle of electrical equivalent resistance. When a current is passed through the array, the resistors on each leg form a parallel network, providing an effective resistance between the two nodes. The total equivalent resistance of the array is equal to the sum of the resistances of the three resistors on each leg divided by the number of Legs in the array.

For example, if two nodes are connected by the YC124-JR-0756RE array, the total equivalent resistance between the two nodes will be equal to 600 ohms. This is calculated by multiplying the resistance of each resistor leg (200 ohms) by the number of legs in the array (3) and then dividing the result (600) by the number of Legs (3). This calculation yields an equivalent resistance of 600 ohms.

As a result, the YC124-JR-0756RE array can be used to provide a precise, consistent level of resistance between two nodes. It is ideal for any application where precise, consistent resistance is required, such as voltage dividers, current limiting applications, and load balancing applications.

The specific data is subject to PDF, and the above content is for reference