YC248-FR-07909RL

Resistor Networks, Arrays

The YC248-FR-07909RL is a type of resistive component that is designed to simplify the electronic circuit design process. It combines several resistor networks into one compact package that occupies minimal space on a printed circuit board. This makes it suitable for applications where space is limited and there is a need to reduce the complexity of the electrical systems.

The YC248-FR-07909RL comprises four resistor networks that each have nine individual resistors, allowing a total of 36 resistors in one package. The resistor networks are connected in series, parallel or mixed series-parallel configurations. Depending on which network you use, the YC248-FR-07909RL is able to provide arbitrary resistance values between 1Ω and 1MΩ. This range can be augmented with additional networks.

The YC248-FR-07909RL is commonly used in applications ranging from power supplies to automotive electronics, motor control, remote sensing, and instrumentation. It is ideal for use in circuits that require accuracy, reliability, and low cost. The package is made out of FR4-grade fiberglass and epoxy, making it resistant to environmental influences and providing excellent thermal conductivity. The yc248-fr-07909rl has a wide operating temperature range of -55°C to +150°C.

Working Principle

The YC248-FR-07909RL utilizes resistor networks to connect its resistors in series, parallel, or mixed series-parallel configurations to obtain desired results. A resistor network consists of an array of resistors that are wired to a common connection in the middle. All the resistors in the network are connected such that the total resistance is equal to the sum of the resistances of all the individual resistors. The YC248-FR-07909RL’s ability to incorporate multiple resistor networks in one package can be used to modify the resistance in the desired direction - i.e. increasing or decreasing the resistance as needed.

The YC248-FR-07909RL\'s resistor networks also allow it to provide higher resolutions than normal resistors due to its ability to modify resistance values in smaller increments. This is especially useful for applications that require highly accurate resistance values for automatically controlling the current flow.

Conclusion

The YC248-FR-07909RL is a resistor network component that is designed to simplify the electrical system design process by combining several resistor networks into a single package. It is able to provide arbitrary resistance values between 1Ω and 1MΩ, allowing it to be used in a multitude of applications. It is ideal for use in circuits that require accuracy, reliability, and low cost. Thanks to its resistive networks, it is able to provide higher resolution than normal resistors, making it suitable for applications requiring precise current control.