YC324-FK-0791KL

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays are a form of passive components. They are usually used for mounting, signal routing, and circuit protection. The YC324-FK-0791KL is one example of these components. This article will discuss the application field and working principle of the YC324-FK-0791KL.

The YC324-FK-0791KL is a type of resistor network, array, specifically a 4-to-5 series flange. It consists of four resistors in a single package. It has a maximum input voltage rating of 200V, and a maximum power dissipation of 90W. The YC324-FK-0791KL also features an HTOL insulation rating of 850VAC, a thermal time constant of 250ms, and a storage temperature range of -40C to +125C.

The main application fields for the YC324-FK-0791KL are for inverter circuit protection, power supply ripple reduction, line termination, isolation, and voltage divider networks. In an inverter circuit, the YC324-FK-0791KL is used to protect the components from high voltage transients and surges. In a power supply, the resistor array can reduce the ripple on the output voltage. The YC324-FK-0791KL can also be used for line termination to reduce voltage ringing, isolation to reduce interference, and voltage divider networks to decrease the voltage across components. Additionally, the YC324-FK-0791KL can be used for balancing electric power systems.

The working principle of the YC324-FK-0791KL can be divided into two categories, static and dynamic. The static working principle is based on Ohm’s law, where the voltage is divided between the resistors in the network. The amount of voltage dropped across each resistor is determined by its resistance. In a dynamic situation, when the load changes, the voltage division also changes. This causes the current in the resistors to change, resulting in a voltage change.

In conclusion, the YC324-FK-0791KL is a type of resistor network, array which is used in a variety of applications. Its main application fields include inverter circuit protection, power supply ripple reduction, line termination, isolation, and voltage divider networks. It works on both the static and dynamic working principles, which are based on Ohm’s law and the change in current due to load changes.

The specific data is subject to PDF, and the above content is for reference