YC358LJK-0722RL

Number of Pins:	10
Height - Seated (Max):	0.028" (0.70mm)
Size / Dimension:	0.252" L x 0.126" W (6.40mm x 3.20mm)
Supplier Device Package:	--
Package / Case:	2512 (6432 Metric), Convex, Long Side Terminals
Mounting Type:	Surface Mount
Applications:	DDRAM, SDRAM
Operating Temperature:	-55°C ~ 155°C
Temperature Coefficient:	±200ppm/°C
Power Per Element:	62.5mW
Series:	YC358
Resistor-Ratio-Drift:	--
Resistor Matching Ratio:	--
Number of Resistors:	8
Tolerance:	±5%
Resistance (Ohms):	22
Circuit Type:	Bussed
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays

Resistor networks, arrays are devices which include various circuit elements such as resistors, capacitors, and diodes within a single small form factor package composed of a two or more dimensional grid. They are used to implement networks of passive components such as filter networks, attenuators, mixers and baluns. They provide an economical and space-efficient alternative to hand wiring individual discrete components.The YC358LJK-0722RL is a surface mount resistor network which features extremely low nominal resistance values. It is a typical three-terminal resistor network consisting of seven resistors of 0.54Ω each arranged as an array of seven-in-parallel. The total recommended load is ±20V and the maximum operating temperature is +125°C. The device is designed for use in audio, telecom, and industrial applications requiring a very low resistance.In an audio application, the YC358LJK-0722RL resistor network can serve as an input attenuator, providing precise control of the signal level when coupled with a potentiometer. This can be used to set the operating volume or signal level for an audio system.In a telecom application, the YC358LJK-0722RL can be used for impedance matching. It is designed with low internal resistance, so it can be used to direct the signal from a source, such as a transceiver, into the correct impedance range of the destination device, such as an antenna.In an industrial application, the YC358LJK-0722RL can be used to balance complex circuits, such as those used to drive motors. This type of balancing ensures that the current is properly distributed to all the components, resulting in improved system efficiency and reliability.The YC358LJK-0722RL resistor network contains seven individual resistors connected in parallel. This arrangement results in a far lower effective total resistance than can be achieved with the same resistors connected in series. This effectively allows the system to operate at lower current levels, with improved efficiency.The YC358LJK-0722RL\'s three-terminal design makes it especially useful for circuit adjustments with minimal fuss. This enables it to be used in applications where ease of adjustment is of primary importance.The working principle of the YC358LJK-0722RL is fairly simple. When current is applied to one terminal, it will split among all the resistors in the array according to their individual resistances. This will adjust the total resistance across the device, allowing for precise control of the flow of power.In conclusion, the YC358LJK-0722RL resistor network is a versatile and cost-effective tool for applications requiring tight control over electrical signals, or precise adjustments in current flow. Its convenient three-terminal design, along with its low effective series resistance, make it an ideal choice for audio, telecom, and industrial systems.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description