Integrated circuit socket
On 2018-08-24 10:46:22 in Relays
Connectors are used to connect cables or electronic devices that can be repeatedly connected and separated. ...
how to detect the four end small power thyristor?
On 2018-10-29 15:00:02 in Relays
To detect the unidirectional conductivity of PN junction,the multimeter is placed in RX 1K block,and the positive and negative resistance between A-GA,GKGA and Gk-K are measured. ...
Potentiometer detection and resistance detection
On 2018-08-22 12:04:06 in Relays
The actual resistance value can be measured by connecting two forms (no positive or negative) to the two ends of the resistor respectively. ...
What is a monochrome LED dot matrix display?
On 2018-10-29 15:27:20 in Relays
Excellent LED dot matrix display is a monochrome light-emitting diode in accordance with the structure of rows and columns ...
Four wave soldering daily maintenance and maintenance knowledge
On 2018-10-30 11:01:43 in Relays
Four wave soldering daily maintenance and maintenance knowledge 1 regularly check the heating pipe voltage is normal,too high voltage will damage the heating pipe. ...
what is a solid state relay (SSR)?
On 2018-12-25 13:11:35 in Relays
Plug-in of electronic components
On 2018-11-01 13:51:17 in Relays
Manual insertion and welding should be first inserted into those components that need to be mechanically fixed,such as the power device radiator,bracket,clip,etc,and then insert the need to weld fixed components. ...
How Solid-State Relays (SSRs) Faces Overheat Challenge?
On 2018-12-18 13:26:35 in Relays
How to prevent solid-state relay and equipment failure!
On 2018-12-17 11:51:59 in Relays
If there is no same type of pipe in use, how to replace it?
On 2018-10-26 15:50:14 in Relays
Diodes are generally not good repair, damage can only be replaced. In selecting diodes, we should pay attention to the following principles. ...
Diode and transistor detection
On 2018-08-22 12:31:42 in Relays
In identifying and detecting common components, the resistance is the forward resistance of the diode. ...
Main parameters of inductors
On 2018-08-22 12:34:29 in Relays
The main parameters of inductors include inductance, permissible deviation, quality factor, sectional capacitance and rated current. ...
Identification and detection of active resistance elements
On 2018-08-22 11:08:45 in Relays
The resistance between 2E and C
On 2018-10-27 11:00:40 in Relays
The resistance between 2E and C.Silicon tube is almost infinite size power pin tube in the tens of thousands of euros,high-power wrong tube in the hundreds of Europe.If the measured resistance is zero ...
Variable capacitance diode, step recovery diode, bidirectional trigger diode
On 2018-08-24 10:57:12 in Relays
It is usually used to trigger bidirectional thyristors, or to form an overvoltage protection circuit. ...
Diode rectifier filter circuit Diode half wave rectifier circuit
On 2018-08-28 17:36:03 in Relays
Transistor FET
On 2018-08-24 11:08:36 in Relays
The appearance of the public field effect transistor is shown in Fig.First, the classification of FET. ...
What is the basic principle of sonar signal simulator based on DDS technology?
On 2021-03-20 11:13:27 in Relays
Sequential logic circuit register
On 2018-08-28 17:30:45 in Relays
it cannot be started. Indicates whether the number of valid cycles is an increment counter or a decrement counter, and the mode (count length) function of the state machine (counter), such as a decimal number. ...
Classification of capacitors
On 2018-10-30 11:59:35 in Relays
According to function.It can be divided into polyester capacitor,mica capacitor,high frequency ceramic capacitor,monolithic capacitor ...
Identification and detection of capacitance components
On 2018-08-22 12:26:48 in Relays
Inductors are usually classified by skeleton, winding, shielding, packing material, magnetic core or magnetic core. ...