Is Replacing Old Mechanical Relays via PLCs a Good Idea?
On 2018-12-17 12:03:18 in Relays
Identification and detection of capacitance components
On 2018-08-22 12:26:48 in Relays
Inductors are usually classified by skeleton, winding, shielding, packing material, magnetic core or magnetic core. ...
If there is no same type of pipe in use, how to replace it?
On 2018-10-26 15:50:14 in Relays
Diodes are generally not good repair, damage can only be replaced. In selecting diodes, we should pay attention to the following principles. ...
Transistor FET
On 2018-08-24 11:08:36 in Relays
The appearance of the public field effect transistor is shown in Fig.First, the classification of FET. ...
What is a transient voltage suppressor diode ( TVS )?
On 2018-10-26 16:57:28 in Relays
Transient voltage suppressor diode is a new type of overvoltage safety protection device. The utility model has the advantages of small size ...
What is a Schottky diode? How to detect?
On 2018-10-26 15:54:21 in Relays
Schottky diode is a low-power, high-current,ultra-high-speed semiconductor device, reverse recovery time trr can be small to a few nanoseconds ...
The types and characteristics of solder wave crests
On 2018-10-30 11:38:53 in Relays
let the solder joints get reliable wetting;the stationary tin wave at the rear is perfect for further trimming the solder joints that have been wettable but irregular in shape ...
Main parameters of inductors
On 2018-08-22 12:34:29 in Relays
The main parameters of inductors include inductance, permissible deviation, quality factor, sectional capacitance and rated current. ...
Diode and transistor detection
On 2018-08-22 12:31:42 in Relays
In identifying and detecting common components, the resistance is the forward resistance of the diode. ...
Identification and detection of active resistance elements
On 2018-08-22 11:08:45 in Relays
Integrated circuit socket
On 2018-08-24 10:46:22 in Relays
Connectors are used to connect cables or electronic devices that can be repeatedly connected and separated. ...
Potentiometer detection and resistance detection
On 2018-08-22 12:04:06 in Relays
The actual resistance value can be measured by connecting two forms (no positive or negative) to the two ends of the resistor respectively. ...
How Solid-State Relays (SSRs) Faces Overheat Challenge?
On 2018-12-18 13:26:35 in Relays
what is a solid state relay (SSR)?
On 2018-12-25 13:11:35 in Relays
Diode rectifier filter circuit Diode half wave rectifier circuit
On 2018-08-28 17:36:03 in Relays
Electret capacitive microphone
On 2018-11-01 14:19:07 in Relays
To measure the secondary coil of the output transformer,it can be measured directly with the two surface pen to check the output end of the city ...
how to detect the four end small power thyristor?
On 2018-10-29 15:00:02 in Relays
To detect the unidirectional conductivity of PN junction,the multimeter is placed in RX 1K block,and the positive and negative resistance between A-GA,GKGA and Gk-K are measured. ...
The resistance between 2E and C
On 2018-10-27 11:00:40 in Relays
The resistance between 2E and C.Silicon tube is almost infinite size power pin tube in the tens of thousands of euros,high-power wrong tube in the hundreds of Europe.If the measured resistance is zero ...
How to prevent solid-state relay and equipment failure!
On 2018-12-17 11:51:59 in Relays
How to identify and detect relays?
On 2018-12-20 14:13:55 in Relays
What is a monochrome LED dot matrix display?
On 2018-10-29 15:27:20 in Relays
Excellent LED dot matrix display is a monochrome light-emitting diode in accordance with the structure of rows and columns ...
What are the trends in data storage in 2020?
On 2020-09-15 10:34:06 in Relays